Bölüm "Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 360, listelenen: 101-120
-
The effect of z value on intergranular phase crystallization of alpha(1)/beta(1)-SiAlON-TiN composites
(Elsevier Sci LTD, 2017)Relationship between z value and intergranular phase (IGP) chemistry has not been completely developed to date for SiAlON based materials. In this study, the effect of z value of beta(1)-SiAlON on crystallization and ... -
Effect of ZrSiO4 on the corrosion behavior of MgO-FeAl2O4 composite refractory materials
(Carl Hanser Verlag, 2016)In this study, the corrosion behavior of refractory materials that were produced by incorporating ZrSiO4 (zircon) at different ratios into MgO-FeAl2O4 (hercynite) were investigated. The values of density and open porosity ... -
Effects of Alumina and White Fused Alumina Addition on Transparent Wall and Floor Tile Glazes
(Polish Acad Sciences Inst Physics, 2015)In tile manufacturing, alpha-Al2O3 is the main type of alumina used in ceramic body and glaze formulations. This raw material acts as an pacifier in porcelain tile bodies and as a matting agent in glazes. White fused alumina ... -
Effects of Aydin Cine region's albite flotation wastes on the properties of floor tile bodies
(Trans Tech Publications LTD, 2004)Within the scope of determining new possible application fields of waste materials albite flotation wastes, being ore treatment outcome, of Aydin Cine region of Turkey, where very rich feldspar deposits are available, have ... -
Effects of Boron Nitride And/Or Hydroxyapatite Compounds on Bone Defect Model of Rats
(Springer London LTD, 2015)… -
Effects of Boron Nitride And/Or Hydroxyapatite Plaques on Bone Healing in Rats With Femoral Fracture
(Springer London LTD, 2015)… -
The effects of processing on the alpha <-> beta SiAlON transformation during cycling heat treatments
(Elsevier Science Sa, 2008)Typical alpha/beta-SiAlON starting composition of formula Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38) was densified by two different sintering processes, hot pressing (HP) and gas pressure sintering (GPS), using Nd(2)O(3) as ... -
The effects of re-firing process under oxidizing atmosphere and temperatures on the properties of strontium aluminate phosphors
(Pergamon-Elsevier Science LTD, 2013)Inorganic phosphorescent pigments have a very wide application, consisting of ceramic decoration and glazes. Therefore, in the present study 3 different commercially available strontium aluminate phosphors (coded Phosphor ... -
The effects of sintering temperature on phase and pore evolution in porcelain tiles
(Elsevier Sci LTD, 2017)The phase and pore evolution of porcelain tiling against sintering temperature are investigated in this study. A standard porcelain tile composition was sintered at nine different temperatures between 1150 and 1230 degrees ... -
Effects of the red mud based pigment addition on the physical and micro-structural properties of porcelain tiles
(Trans Tech Publications LTD, 2004)In the production of conventional porcelain tiles colouring agents, being either in the form of pure oxides or pigments, are commonly and widely used at considerably high amounts to increase the attraction impact of final ... -
Effects of TiO2, ZnO, and Fe3O4 nanofillers on rheological behavior, microstructure, and reaction kinetics of rigid polyurethane foams
(Wiley, 2016)Effects of different types and shapes of titanium dioxide, zinc oxide, and magnetite nanofillers on the rheological behavior of polyol/nanofiller suspensions, on the rigid polyurethane foam formation reaction, and hence ... -
Electric field effects on CNTs/vinyl ester suspensions and the resulting electrical and thermal composite properties
(Elsevier Sci LTD, 2010)In this study, electrical conductivity of a vinyl ester based composite containing low content (0.05, 0.1 and 0.3 wt.%) of double and multi-walled carbon nanotubes with and without amine functional groups (DWCNTs, MWCNTs, ... -
Electric-field-induced phase switching in textured Ba-doped bismuth ferrite lead titanate
(IEEE, 2013)The template grain growth technique was used to synthesis textured 60BiFeO(3)-PbTiO3 (60:40BFPT) by using platelets of BaTiO3 as template. Synchrotron measurement clearly showed textured 60: 40BFPT. Moreover, in situ high ... -
Electrophoretic deposition of hydroxyapatite-hexagonal boron nitride composite coatings on Ti substrate
(Elsevier Science BV, 2017)In this study, commercial pure titanium samples were coated with nano hydroxyapatite-nano hexagonal boron nitride (nano HA-nano hBN) composite by electrophoretic deposition (EPD). The effect of process parameters (applied ... -
Electrophoretic deposition of nano-sized BaTiO3
(Springer, 2006)In this study, a non-aqueous method in a simple one pot reaction process was employed to synthesize nano-sized BaTiO3 particles and then electrophoretic deposition technique was employed for thin film coatings. In the first ... -
Electrophoretic deposition of nanocrystalline BaTiO3 in ethanol medium
(Trans Tech Publications LTD, 2006)Electrophoretic deposition technique is a versatile coating method. With this method not only flat surfaces but also curved or rough surfaces can be coated in various thicknesses. In this study, BaTiO3 nanocrystals were ... -
Electrophoretic deposition of ZnO
(Trans Tech Publications LTD, 2004)Electrophoretic phonemenon is applied in different parts of science. Electrophoretic Deposition (EPD) is effective, fast and controllable process for obtaining various thin or thick film layers. In this study application ... -
Electrophoretic deposition of ZnO thin film in aqueous media
(Springer, 2004)In thin films, controlled porous structures are desired for certain ceramic gas sensors. The aim of this study was to fabricate ZnO coated substrates starting with aqueous suspensions with electrophoretic deposition ... -
Energy Harvesting Potential of Lead Free NBT-BZT Piezoelectric Ceramics
(IEEE, 2014)In this study, Zr doped NBT-BZT (94Na(0.5)Bi(0.5)TiO(3)-6BaZr(x)T(1-x)O(3)) (x=0.1) powder was synthesis with solid-state method. The sintering process was carried out at between 1035 to 1180 degrees C in air for 2h. The ... -
Energy Harvesting with Multilayer Piezoelectric Ceramics
(IEEE, 2014)Energy harvesting from piezoelectric ceramic components can be achieved in three ways. These are impact induced, continues vibration induced, and decaying vibration induced. Defining the necessary characteristic of ...