Bölüm "Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 360, listelenen: 181-200
-
LPG sensing characteristics of electrospray deposited SnO2 nanoparticles
(Elsevier Science BV, 2014)In this study, SnO2 films were fabricated on conductive substrate such as aluminum and platinum coated alumina using electro-spray deposition (ESD) method for gas sensor applications. Solution flow rate, coating time, ... -
Magnetic MCM-41 silica particles grafted with poly(glycidylmethacrylate) brush: Modification and application for removal of direct dyes
(Elsevier Science BV, 2017)Magnetic MCM-41composite particles were prepared and modified with (3-aminopropyl) triethoxysilane (APTES), then grafted with poly(glycidyl methacrylate) p(GMA) by surface-initiated atom transfer radical polymerization ... -
Magnetic Mesoporous Silica Nanocomposite for Biodiesel Production
(Polish Acad Sciences Inst Physics, 2017)Ordered mesoporous silicas can be utilized as support because of having large surface area, tunable porosity, uniform pore size distribution, high thermal stability and modifiable properties. However, these materials ... -
Magnetic Nano-Sized Solid Acid Catalyst Bearing Sulfonic Acid Groups for Biodiesel Synthesis
(De Gruyter Poland Sp Zoo, 2018)In our approach for magnetic iron oxide nanoparticles surface modification, the fabrication of an inorganic shell, consisting of silica by the deposition of preformed colloids onto the nanoparticle surface and functionalization ... -
Materials for high performance cymbal transducers
(Springer, 2004)The effects of materials on the performance of the cymbal-type flextensional transducers were investigated under in-air and water-loaded conditions by finite element analysis (FEA) methods. At the initial stage, FEA and ... -
Mechanical characterization of highly porous beta-Si3N4 ceramics fabricated via partial sintering & starch addition
(Elsevier Sci LTD, 2013)In this study, porous beta-Si3N4 ceramics containing limited amount of Sm2O3 and CaO as sintering aids were produced by addition of potato starch (10 and 20 vol.%) and partial sintering. Two different Si3N4 powders, alpha- ... -
Mechanical properties and thermal shock behaviour of alumina-mullite-zirconia and alumina-mullite refractory materials by slip casting
(Elsevier Sci LTD, 2003)Strength and modulus values of slip-cast alumina-mullite-zirconia and alumina-mullite refractories have been determined as a function of quench temperature by air and water quenching. The resistance to fracture initiation ... -
Mechanical properties of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)The relationships between mechanical properties and microstructure of alumina-mullite-zircon refractories were investigated by varying zircon content. Various sintering temperatures were used for the slip-cast refractories ... -
The mechanism for the colour change of iron chromium black pigments in glazes through transmission electron microscopy techniques
(Elsevier Sci LTD, 2011)Black iron chromium (Fe-Cr) bearing oxide pigments are generally utilised as effective colourants in a wide variety of applications. However, in the case of their use within ZnO-containing glazes, they yield an undesirable ... -
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ... -
Micro-Raman spectroscopic analysis of inks and pigments in illuminated medieval old-Slavonic manuscripts
(Wiley-Blackwell, 2012)Micro-Raman spectroscopy was applied in characterisation of inks and pigments used in the text, illuminations and miniatures of two old-Slavonic manuscripts: Vrutok four gospels (13th14th centuries) and Benche four gospels ... -
Microfluidization, time-effective and solvent free processing of nanoparticle containing thermosetting matrix resin suspensions for producing composites with enhanced thermal properties
(Pergamon-Elsevier Science LTD, 2016)Dispersion of low content (0.1 wt.%) of multi walled carbon nanotubes (MWCNTs) in an epoxy resin through microfluidization was brought under spotlight as a case study. For the sake of performance comparison, epoxy resin ... -
Micronizing ceramic pigments for inkjet printing: Part I. Grindability and particle size distribution
(Elsevier Sci LTD, 2015)Inkjet printing is increasingly used to decorate ceramic tiles, with pigmented inks in most cases. These inks are manufactured by micronizing conventional ceramic pigments down to median diameters of 0.2-0.6 mu m. Although ... -
Micronizing ceramic pigments for inkjet printing: Part II. Effect on phase composition and color
(Elsevier Sci LTD, 2015)Drop on demand ink-jet printing is turning to be the leading technique in the decoration of ceramic tiles. This technology makes use in most cases of pigmented inks which are manufactured by micronizing conventional ceramic ... -
Microstructural Characterisation and Investigation of the Effects of ZrSiO4-Y2O3 Additions on Corrosion Behaviour of MgO-Spinel Composite Refractories
(Trans Tech Publications LTD, 2012)Corrosion resistance of MgO-Spinel (M-S) composite refractories containing various amounts of ZrSiO4-Y2O3 constituents was investigated. Density and open porosity values were measured and evaluated. Corrosion tests of ... -
Microstructural characterization of corn starch-based porous thermoplastic composites filled with multiwalled carbon nanotubes
(Wiley, 2013)Microstructural characterization of corn starch-based porous thermoplastic (TPS) composites containing various contents (0.1, 0.5, and 1 wt %) of multiwalled carbon nanotubes (MWCNTs) was performed. Corn starch was plasticized ... -
Microstructural evolution R-alpha-SiAlON ceramics (R=Y, Y+Sm and Sm)
(Trans Tech Publications LTD, 2004)Yttrium or samarium doped alpha-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800degreesC and then held for 1 h while another ... -
The microstructural features of an alumina-mullite-zirconia refractory material corroded by molten glass
(Elsevier Sci LTD, 2003)An alumina-mullite-zirconia refractory penetrated by a standard soda-lime-silica glass was statically tested at 1370 degreesC for 72 h. Microstructural features and EDAX analysis of the compositions in the corroded region ... -
Microstructure-Mechanical Properties-Wear Resistance Relationship of SiAlON Ceramics
(Springer, 2009)In designing wear-resistant ceramics, it is important to understand the influence of the microstructure and material properties on friction and wear behavior. In addressing such issues, a series of fretting-wear tests was ...