Bölüm "Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 360, listelenen: 41-60
-
Composition of products obtained via fast pyrolysis of olive-oil residue: Effect of pyrolysis temperature
(Elsevier Science BV, 2007)As an essential thermochemical process, pyrolysis is mainly dependent on temperature. Temperature affects mostly product distribution and composition. In this study, compositional analysis of the products obtained by thermal ... -
Computational analysis on cymbal transducer
(Taylor & Francis Inc, 2003)Finite Element Analysis in collaboration with experimental studies was conducted to investigate the effects of dimensional parameters on the performance of the cymbal transducer. ANSYS 5.5 FEM code was used for computational ... -
Corrosion behavior of MgO-MgAl2O4-FeAl2O4 composite refractory materials
(Australian Ceramic Society, 2017)This paper investigated the corrosion behavior of refractory materials that were produced by incorporating hercynite (FeAl2O4, H) at different ratios into MgO-MgAl2O4 (spinel, S). Meanwhile, the values of density and open ... -
The corrosion resistance of alumina-mullite-zircon refractories in molten glass
(Trans Tech Publications LTD, 2004)Corrosion measurements on a set of alumina-mullite-zircon refractories have been carried out using a static crucible test consisting of a "hole in a block". Rates of corrosion of the refractory at 1370 degreesC for 72 h ... -
Cost Effective Slurry Preparation in Porcelain Tile Production
(Goller Verlag GMBH, 2009)During ceramic tile production (wall, floor and porcelain stoneware), wet milling process for the preparation of ceramic slurries is widely used. The currently preferred wet grinding machines are discontinuous and/or ... -
Creep and recovery behaviors of chemically induced grafted low density polyethylene films containing silanized hexagonal boron nitride nanosheets
(Amer Scientific Publishers, 2018)Few layers boron nitride nanosheets (BNNSs) were derived from precursors of specially synthesized micro-sized hexagonal boron nitrides (h-BNs) of large flakes through microfluidization. They were then considered promising ... -
A critique of master sintering curve analysis
(Elsevier Sci LTD, 2018)In this work, we explore factors affecting the accuracy of the master sintering curve (MSC) approach for analyzing the complete sintering profile of ceramic powders. We show that the instantaneous anisotropic shrinkage ... -
Cure kinetics of vapor grown carbon nanofiber (VGCNF) modified epoxy resin suspensions and fracture toughness of their resulting nanocomposites
(Elsevier Science Sa, 2009)In this study, the cure kinetics of Cycom 977-20. an aerospace grade toughened epoxy resin, and its suspensions containing various amounts (1, 3 and 5 wt.%) of vapor grown carbon nanofibers (VGCNFs) with and without chemical ... -
CVD grown 2D MoS2 layers: A photoluminescence and fluorescence lifetime imaging study
(Wiley-V C H Verlag GMBH, 2016)In this letter, we report on the fluorescence lifetime imaging and accompanying photoluminescence properties of a chemical vapour deposition (CVD) grown atomically thin material, MoS2. mu-Raman, mu-photoluminescence (PL) ... -
CVD growth of monolayer MoS2: Role of growth zone configuration and precursors ratio
(IOP Publishing LTD, 2017)Single-layer, large-scale two-dimensional material growth is still a challenge for their wide-range usage. Therefore, we carried out a comprehensive study of monolayer MoS2 growth by CVD investigating the influence of ... -
Cytocompatibility property evaluation of gas pressure sintered SiAlON-SiC composites with L929 fibroblast cells and Saos-2 osteoblast-like cells
(Elsevier Science BV, 2012)Although the oxide ceramics have widely been investigated for their biocompatibility, non-oxide ceramics, such as SiAlON and SiC are yet to be explored in detail. Lack of understanding of the biocompatibility restricts the ... -
Deaging of heat-treated iron-doped lead zirconate titanate ceramics
(Amer Inst Physics, 2006)Doping strongly influences the properties of ferroelectric perovskite materials. One striking difference between donor- and acceptor-doped materials is the transition from "soft" to "hard" ferroelectric behavior. The ... -
Decolouration effect of WC addition on gas pressure sintered alpha-beta SiAlON ceramics
(Elsevier Science BV, 2004)In this study, an attempt was made to mask an inhomogeneous gray colouration featured on the surfaces of the gas pressure sintered alpha-beta SiAlON ceramics containing 50% alpha and 50% beta SiAlONs in the form of spots. ... -
Densification and properties of in-situ synthesized ZrB2-SiC composities from ZrO2, B4C and SiC system
(Korean Assoc Crystal Growth, Inc, 2017)Zirconium diboride-silicon carbide (ZrB2-SiC) ceramics were in-situ synthesized and densified by the spark plasma sintering (SPS) method using ZrO2, B4C and SiC as starting powders. Both synthesis and densification processes ... -
Densification of Sr-Mg doped SiAlONs with GPS and SPS
(Trans Tech Publications LTD, 2007)At temperature above 1200 degrees C, the thermal stability of alpha-SiAlON phases has been debated since 1992; however, it has been discussed if any alpha-SiAlON phase can be formed in Ce, La, Eu and Sr-doped SiAlON systems. ... -
Design of Alternative Composite Material to Available Tractor Cabins
(Springer, 2016)All mobile machinery is at the risk of rolling over, depending on the machinery characteristics the need to protect operator from the risk of being injured or causing death due to rollover has been of prime importance in ... -
Design parameter investigation of industrial size ultrasound textile treatment bath
(Elsevier Science BV, 2009)Design requirements for industrial size ultrasound bath for textile treatments have been determined. For this purpose, effects of sound pressure level, bath temperature, bath volume, textile material type and hydrophility ... -
Designing compressive properties of titanium foams
(Springer, 2009)Titanium foams were produced by optimizing a relatively cheap method, sintering under flowing high purity argon gas with fugitive space holder. Removal of the space holder was conducted by dissolution in hot deionized water ... -
Development of a multipurpose tile body: Phase and microstructural development
(Elsevier Sci LTD, 2006)In this study, an attempt was made in order to develop a multipurpose tile body using a single formulation. In order to achieve this, several body recipes were prepared using mainly local raw materials with clearly defined ... -
Development of alpha-beta SiAlON ceramics from different Si3N4 starting powders
(Trans Tech Publications LTD, 2009)alpha-beta SiAlON ceramics were produced from different starting Si3N4 powders including beta-Si3N4 and alpha-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, ...