Bölüm "Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü" WoS İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 360, listelenen: 81-100
-
Effect of Kaolin Type on Pyroplastic Deformation of Sanitaryware Porcelain Body
(Gazi University, Fac Engineering Architecture, 2016)Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ... -
The effect of metal coating on the strength of capacitor-discharge joining of oxide ceramics
(Trans Tech Publications LTD, 2004)The Surfaces of alumina and zirconia tiles were sputter coated with various metallic films (Al, Ti, Al+Y and Nb) and were joined by a capacitor-discharge technique using either Al, Ti or Nb as interlayer materials. The ... -
The effect of mullite on the mechanical properties and thermal shock behaviour of alumina-mullite refractory materials
(Elsevier Sci LTD, 2003)Mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories have been investigated. There was a marked improvement in strength, Young's modulus and fracture toughness values with the addition ... -
Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel
(Taylor & Francis Inc, 2013)The aim of this study was to investigate the effects of nano hexagonal boron nitride(hBN) particles on the friction and wear properties of AISI 4140 steel material when the hBN particles are used as an oil additive. Nano ... -
Effect of passivation and precipitation hardening on processing and mechanical properties of B4C-Al composites
(Elsevier Sci LTD, 2011)Boron carbide aluminium composites were produced by infiltrating aluminium alloys into porous boron carbide preforms at different temperatures under an argon gas atmosphere. Aim of this study was controlling the reaction ... -
The Effect of Porosity and Glassy Phase Amount of Porcelain Tiles on Ultrasonic Velocity
(Australian Ceramic Society, 2015)Non-destructive testing (NDT) has been playing critical role in processing, testing and structural evaluation of materials. Ultrasonic testing is a widely used characterization method in non-destructive testing (NDT). The ... -
Effect of Processing Parameters on Compressive Behavior of Ti Foams
(Destech Publications, Inc, 2008)Among metal foams, titanium (Ti) and its alloys are very attractive since they combine unique properties such as high strength-to-weight ratio, excellent corrosion resistance and biocompatibility. This study presents a ... -
Effect of SiC addition on the thermal diffusivity of SiAlON ceramics
(Elsevier Sci LTD, 2017)Despite the fact that thermal conductivity is a crucial parameter for SiAlON ceramics with respect to their suitability in various applications, including high-temperature structural components, wear parts, and cutting ... -
Effect of sintering conditions and heat treatment on the properties, microstructure and machining performance of alpha-beta-SiAlON ceramics
(Elsevier Sci LTD, 2012)The properties of SiAlON ceramics are strongly affected by the composition and structure of the intergranular phase, which are controlled by dopants, sintering conditions and starting silicon nitride (Si3N4) powder ... -
The effect of SnO2 on the improvement of mechanical properties of MgO-MgAl2O4 composites
(Elsevier Sci LTD, 2012)Incorporation of SnO2 into MgO-spinel (M-S) increased mechanical properties significantly. Relationships between the parameters improving mechanical properties and microstructural variables were examined. Basic parameters ... -
Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
(Korean Assoc Crystal Growth, Inc, 2014)Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts ... -
Effect of the milling process on the properties of CoFe2O4 pigment
(Elsevier Sci LTD, 2013)In this study, CoFe2O4 pigments were synthesised using both co-precipitation and conventional ceramic methods. Pigment particles prepared using the conventional ceramic method were subsequently milled to submicron size. ... -
Effect of the particle size distribution of spinel on the mechanical properties and thermal shock performance of MgO-spinel composites
(Elsevier Sci LTD, 2003)The influence of varying the amounts of spinel with a similar median particle size, but with different distribution, on the mechanical properties and thermal shock performance of MgO-spinel composites was investigated. ... -
Effect of the Particle Size of Hard Raw Materials on Physical Properties of Sanitaryware Porcalain
(Gazi University, Fac Engineering Architecture, 2011)Sanitaryware porcelain is a kind of a group of glassy porcelains called "vitreous china". The raw materials quartz sand and feldispar used for production of these porcelains are hard materials. It is well known that particle ... -
Effect of the Powder Process Type on Dielectric and Leakage Current Characteristics of Flux Grown 94NBT-6BT Single Crystals
(IEEE, 2014)In this study, 94NBT-6BT single crystals were grown by flux growth method using uncalcined and calcined 94NBT-6BT powder. Crystal structures and chemical composition of grown crystals were characterized by X-ray diffraction ... -
Effect of the processing on the production of cordierite-mullite composite
(Elsevier Sci LTD, 2010)In this study, effect of process on the production of cordierite mullite composite was studied. For this reason two different processing methods were used in the production of cordierite mullite composites. In first process, ... -
The effect of the wet-milling process on sintering temperature and the amount of additive of SiAlON ceramics
(Elsevier Sci LTD, 2010)In this study, nano-sized SiAlON powders were produced by wet milling at elevated speeds as a top-to-bottom process. Before the milling process, different milling times and mediums were performed for the determination of ... -
Effect of Thickness on the Structural, Microstructural, Electrical and Magnetic Properties of Ni Films Elaborated By Pulsed Electrodeposition on Si Substrate
(World Scientific Publ Co Pte LTD, 2018)We have studied the effect of thickness on the structural, microstructural, electrical and magnetic properties of Ni films electrodeposited onto n-Si (100) substrates. A series of Ni films have been prepared for different ... -
Effect of transition metal oxide additions on the chemical durability of SrO-MgO-ZrO2-SiO2 glasses
(Soc Glass Technology, 2009)SrO-MgO-ZrO2SiO2 quaternary glasses, such as 26SrO, 20MgO, 14ZrO(2),40SiO(2) (wt%,; Zrn glass) have been found to be highly alkaline resistant because of the high ZrO2 and MgO contents of such compositions, However, the ...