Search
Now showing items 1-10 of 33
Influence of the growth conditions on the optical and structural properties of self-assembled InAs/GaAs quantum dots for low As/In ratio
(Elsevier Science BV, 2017)
We report on the growth and characterization of self-assembled InAs/GaAs quantum dots (QDs). The influence of the systematically changed growth conditions on the opto-electronic and structural properties of the QDs were ...
Chemical durability behaviour of bulk glasses in the SrO-Mn2O3-Fe2O3-MgO-ZrO2-SiO2 (SMFMZS) system
(Trans Tech Publications LTD, 2002)
It is known that the SrO-MgO-ZrO2-SiO2 (SMZS) system glasses with 40 weight % silica content seem to give a very high chemical endurance against highly alkaline solutions and can be recommended for the reinforcement of ...
Phase studies of reactive infiltrated boron carbide-aluminium composites by quantitative XRD
(Trans Tech Publications LTD, 2002)
Fully dense (> 98 % of theoretical) boron carbide (B4C)-aluminium (Al) composites were produced between 985 degrees and 1370 degreesC by pressureless melt infiltration of Al alloys into porous B4C compacts under an argon ...
Mechanical properties of melt infiltrated boron carbide-aluminium composites
(Trans Tech Publications LTD, 2002)
Boron carbide (B4C)-aluminium (Al) composites were produced by melt infiltration of 2024-T3 series Al alloys into porous B4C compacts in the temperature range of 985 degrees -1370 degreesC under an inert atmosphere (Ar). ...
Transmission electron microscopy of SrO containing multi-cation doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2002)
An advantage of alpha-SiAlON is that it can accommodate cations of sintering additives and hence reduces the amount of deleterious remnant intergranular amorphous phase. However, it is believed that relatively large cations ...
Reactions at ceramic-metal interfaces in capacitor-discharge joined ceramics
(Transtec Publications LTD, 1999)
A capacitor-discharge joining technique has been used to fabricate zirconia-AlxNiyYz zirconia (ZrO2) joints, in addition, the surface of the ZrO2 tiles were sputter coated with Ti and joined using Al as an interlayer ...
Effects of cobalt, copper, manganese and titanium oxide additions on the microstructures of zinc containing soft porcelain glazes
(2002)
Different types of glazes, which are nearly all based upon silicate compositions, are used to meet a wide range of requirements in service. Many artistic effects are achieved by departing from a clear, smooth, transparent ...
Chemical durability behaviour of bulk glasses in the SrO-Mn2O3Fe2O3-MgO-ZrO 2-SiO2 (SMFMZS) system
(2001)
It is known that the SrO-MgO-ZrO2-SiO2 (SMZS) system glasses with 40 weight % silica content seem to give a very high chemical endurance against highly alkaline solutions and can be recommended for the reinforcement of ...
Transmission electron microscopy of SrO containing multi-cation doped ?-SiAlON ceramics
(2002)
An advantage of ?-SiAlON is that it can accommodate cations of sintering additives and hence reduces the amount of deleterious remnant intergranular amorphous phase. However, it is believed that relatively large cations ...
The development and characterisation of zinc crystal glazes used for Amakusa-like soft porcelains
(Elsevier Sci LTD, 2000)
In porcelain production, as well as bodies expected to have white colour, compaction and translucency, suitable glaze compositions have great importance from both a technological and decoration point of view. Supplying the ...