Güncel Gönderiler: Fakülteler
Toplam kayıt 10075, listelenen: 1041-1060
-
Microstructural evolution R-alpha-SiAlON ceramics (R=Y, Y+Sm and Sm)
(Trans Tech Publications LTD, 2004)Yttrium or samarium doped alpha-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800degreesC and then held for 1 h while another ... -
Formation of alpha-SiAlON ceramics containing scandium
(Trans Tech Publications LTD, 2004)alpha-SiAlON is able to accommodate cations into its crystal structure if the cations are sufficiently small in size, thus helping to reduce the volume of the remnant grain boundary phase after processing. Lutetium with ... -
Thermal shock behaviour of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)Thermal shock behaviour of alumina-mullite-zircon refractories was investigated by varying zircon content. Thermal shock parameters R and R-st based on the room temperature mechanical measurements were calculated as a ... -
Mechanical properties of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)The relationships between mechanical properties and microstructure of alumina-mullite-zircon refractories were investigated by varying zircon content. Various sintering temperatures were used for the slip-cast refractories ... -
Dopant effects on sintering and microstructure development in zinc oxide-based electroceramics
(Trans Tech Publications LTD, 2004)In this study, effects of dopants including Bi2O3, Ta2O5, Sb2O3 on sintering and microstructure development in ZnO-based electroceramics were investigated. Bi2O3 addition to ZnO enhances the densification process and results ... -
Investigation of the Improvements on Mechanical Properties and Thermal Performance of MgO-MgAl2O4 Composite Refractories by Additions of ZnO-Al2O3 to MgO
(Trans Tech Publications LTD, 2012)The variations and developments with the reasons on the mechanical properties of MgO-MgAl2O4 and MgO-ZnO-Al2O3 composite refractories were examined and thermal parameters affecting the durability of composites at high ... -
Spinel formation, reaction conditions and densification properties of magnesia-spinel composites
(Trans Tech Publications LTD, 2004)Densification, reaction conditions and properties of densified MgO and spinel composites were examined using both pressureless sintering and hot-pressing. Initially fine (32 nm) MgO powder, either alone or blended with mum ... -
Decolouration effect of WC addition on gas pressure sintered alpha-beta SiAlON ceramics
(Elsevier Science BV, 2004)In this study, an attempt was made to mask an inhomogeneous gray colouration featured on the surfaces of the gas pressure sintered alpha-beta SiAlON ceramics containing 50% alpha and 50% beta SiAlONs in the form of spots. ... -
Synthesis and sintering of cordierite at low temperature from kaolin and magnesium hydroxide
(Trans Tech Publications LTD, 2004)Thermal reactions of ultrafine Mg(OH)(2) mixtures of ultrafine particles and kaolin mixtures were investigated to obtain cordierite at low temperatures. Magnesium hydroxide was precipitated from magnesium chloride (MgCl2) ... -
Investigation of parameters affecting formation of mullite from kaolin
(Trans Tech Publications LTD, 2004)This study aims to improve the understanding of formation of mullite from kaolin at low process temperature using different sintering regimes. The optimum parameters affecting mullite formation from kaolin such as sintering ... -
Development of laminar type functionally graded SiAlON ceramics
(Trans Tech Publications LTD, 2004)In order to combine high hardness with high toughness, laminar type (two layers) functionally graded (FGM) SiAlON ceramics were developed. In a previous study achieved by the same authors, presence of a sharp transition ... -
The effect of boron waste in phase and microstructural development of a terracotta body during firing
(Elsevier Sci LTD, 2006)In the present study, a dewatering sieve waste (TSW) of Etibor Kirka Borax company (Turkey) was employed in different amounts in order to develop an experimental terracotta floor tile body composition in combination with ... -
Interactions between a leadless glaze and a biscuit fired bone China body during glost firing - part III: effect of glassy matrix phase
(Elsevier Sci LTD, 2003)As the final part of the study, the interactions between a commercial leadless glaze and a simulated bone china body glass during glost firing at different temperatures have been investigated. Advanced techniques such as ... -
Utilization of coal combustion fly ash in terracotta bodies
(Trans Tech Publications LTD, 2004)In this present work, coal combustion fly ash from a power plant in Turkey was used in combination with a traditional raw material in terracotta production with the aim of having a product with improved physico-mechanical ... -
Interactions between a bismuth type leadless glaze and a bone China body during glost firing
(Trans Tech Publications LTD, 2004)In the present study, the interactions between a high bismuth type commercial transparent leadless glaze and a biscuit fired bone china body during glost firing at different temperatures were investigated using SEM. The ... -
Computational analysis on cymbal transducer
(Taylor & Francis Inc, 2003)Finite Element Analysis in collaboration with experimental studies was conducted to investigate the effects of dimensional parameters on the performance of the cymbal transducer. ANSYS 5.5 FEM code was used for computational ... -
Pyrolysis of two different biomass samples in a fixed-bed reactor combined with two different catalysts
(Elsevier Sci LTD, 2006)Pyrolysis of Euphorbia rigida and sesame stalk biomass samples with two selected commercial catalyst, namely DHC-32 and HC-K 1.3Q, have been conducted in a fixed-bed reactor. The effect of different catalysts and their ... -
Development of a multipurpose tile body: Phase and microstructural development
(Elsevier Sci LTD, 2006)In this study, an attempt was made in order to develop a multipurpose tile body using a single formulation. In order to achieve this, several body recipes were prepared using mainly local raw materials with clearly defined ... -
Investigation of borax waste behaviour in tile production
(Elsevier Sci LTD, 2007)Although there are various studies published in the relevant literature on the use of borates in tile production, borax waste has been mainly used in place of feldspar and the results showed that borate migration to the ... -
Fracture toughness of alumina/lanthanum titanate laminate composites with a weak interface
(Elsevier Science BV, 2007)Layers of lanthanum titanate (La2Ti2O7) and alpha-alumina (alpha-Al2O3) were employed to form a layered composite in order to improve the fracture toughness of monolithic alumina. The composites were produced by two different ...
