Güncel Gönderiler: Fakülteler
Toplam kayıt 10075, listelenen: 4101-4120
-
Component-based exergetic measures of an experimental turboprop/turboshaft engine for propeller aircrafts and helicopters
(Inderscience Enterprises LTD, 2012)In this paper, component-based exergetic assessment is presented for an experimental turboprop/turboshaft engine, including comparisons and exergetic performance such as their efficiencies, improvement potentials, exergy ... -
Exergo-sustainability indicators of a turboprop aircraft for the phases of a flight
(Pergamon-Elsevier Science LTD, 2013)One of the key challenges for sustainable aviation is to reduce global and local environmental impacts. The scope of this study is analysed and discussed in detail for better understanding of sustainability performances ... -
Exergetic and exergo-economic analysis of a turboprop engine: a case study for CT7-9C
(Inderscience Enterprises LTD, 2012)The turboprop engine has played an important role in short haul commuter and military transport aircraft where high speed is not critical. It may provide the aviation sector with one of the most significant means of achieving ... -
Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications
(Pergamon-Elsevier Science LTD, 2016)Fuel efficiency of aircraft and helicopter becomes greater concern in recent years caused by rising fuel costs and as well as environmental impact of aviation emissions. Modern helicopters, however, highly complex systems ... -
On-design exergy analysis of a combustor for a turbojet engine: a parametric study
(Emerald Group Publishing LTD, 2017)Purpose - The purpose of this study is to perform an exergy analysis of a turbojet engine combustor at different cycle parameters. Design/methodology/approach - Base cycle parameters have been defined for the engine, and ... -
Exergy-based sustainability analysis of a low-bypass turbofan engine: A case study for JT8D
(Elsevier Science BV, 2016)The growth in demand for air transport is a problem for the global and local environment. There are, moreover, fundamental conflicts with sustainable development objectives. Sustainability demands a sustainable supply of ... -
Investigating the Effect of Turbine Inlet Temperature on the Exergetic Improvement Potential of a Small Turbojet Engine
(IEEE, 2017)This paper analyzes and evaluates exergetic improvement rate (IPex) of the components of a small turbojet engine with various turbine inlet temperatures. The engine consists of an inlet, starter generator, a centrifugal ... -
Flight control and flight experiments of a tilt-propeller VTOL UAV
(SAGE Publications LTD, 2018)The purpose of this work is to present a study on the stability and control of an unmanned, fixed wing, vertical take-off and landing aerial vehicle. This airplane is driven by a fixed-pitch tilt-propeller system with the ... -
0-1 integer programming model for procedural separation of aircraft by ground holding in ATFM
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2014)This study presents a 0-1 integer programming model for air traffic flow management. The model is used for determining optimum departure times of aircraft so as to avoid aircraft conflicts and to balance capacity and demand ... -
Assessment of degradation effects for an aircraft engine considering exergy analysis
(Pergamon-Elsevier Science LTD, 2017)Despite the improvements in engine technology, the combustion processes and wear occurred in engine components affect performance adversely. The turbine and compressor fouling, degradation mechanisms such as erosion, ... -
Identification and quantification of reaction phases at Si3N4-Ti interfaces by using analytical transmission electron microscopy techniques
(Elsevier Sci LTD, 2013)Silicon nitride (Si3N4) and titanium (Ti) were successfully bonded by using a capacitor discharge joining method. The resulting sample interfaces were characterized by scanning electron microscopy (SEM) and analytical ... -
Failure analysis of landing gears strut bearings
(Pergamon-Elsevier Science LTD, 2017)This paper analyses TB 20 training aircraft main landing gear attachment bearings which were failed as a result of cracks. Strut bearing is an attachment fitting of landing gear which attached to the wing spar and secures ... -
Characterization of the interfaces formed at the silicon nitride superalloy joints
(Australian Ceramic Society, 2017)In this study, silicon nitride ceramics (Si3N4) were joined by using a capacitor discharge technique with an Inconel 718 superalloy interlayer and heat-treated in order to determine possible reactions between these two ... -
Comparison of Shape Optimization Techniques Coupled with Genetic Algorithm for a Wind Turbine Airfoil
(IEEE, 2016)Airfoil optimization is an important subject for wind turbines in order to increase the flow efficiency along the blade sections. The first important subject for airfoil shape optimization is the mathematical description ... -
Exergetic Sustainability Indicators as a Tool in Commercial Aircraft: A Case Study for a Turbofan Engine
(Taylor & Francis Inc, 2015)This paper focuses on the exergetic sustainability indicators of a medium-range commercial aircraft engine for constant reference environment and ground running conditions. First, a detailed exergy analysis of turbofan ... -
Sustainability assessment of PW6000 turbofan engine: an exergetic approach
(Inderscience Enterprises LTD, 2014)In this paper, theory, methodology and example application are developed and shown for a PW6000 high-bypass turbofan engine in terms of exergo-sustainable perspective. To obtain exergetic sustainability indicators, first, ... -
Comparison of Air Transportation Systems of Turkey and Spain as the Competitors in Tourism Sector
(Akdeniz University, 2017)The growth of air transportation in a country affects positively the development of other industries especially tourism. Turkey and Spain rank among the top countries in the world with their most developed air transportation ... -
New Model for the Optimization of Runway Orientation
(Asce-Amer Soc Civil Engineers, 2014)One of the most significant factors that affects the location of airport elements is the optimum runway orientation. In this study, a new model called Calculation of Optimum Runway Orientation (CORO) is developed with an ... -
Aircraft Sensor and Actuator Fault Detection, Isolation, and Accommodation
(Asce-Amer Soc Civil Engineers, 2011)The purpose of the paper is to present an approach to detect, isolate, and accommodate the aircraft sensor and actuator faults using unknown input observers (UIOs). Full-order observers, reduced-order observers, and UIOs ... -
Evaluation of Safety Management Systems in the Turkish Aviation Industry: Evidence From Aviation Companies
(Int Organization Center Acad Research, 2016)This study focuses on the Safety Management System (SMS) brought forward by aviation authorities in the early 2000s, which aims to increase the safety level of air transportation activities and to maintain these activities ...