Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKurama, Semra
dc.contributor.authorHerrmann, M.
dc.contributor.authorMandal, Hasan
dc.date.accessioned2019-10-20T07:59:52Z
dc.date.available2019-10-20T07:59:52Z
dc.date.issued2001
dc.identifier.issn1013-9826
dc.identifier.urihttps://hdl.handle.net/11421/15801
dc.identifier.urihttps://doi.org/10.4028/www.scientific.net/KEM.206-213.1009en_US
dc.description7th Conference and Exhibition of the European Ceramic Society -- 9 September 2001 through 13 September 2001 -- Brugge -- 58742en_US
dc.description.abstractTwo types of Y-?-SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825°C for 3 hrs, another group of samples was held at a lower temperature (1500°C or 1600°C) for 1 hr and then heated up to 1825°C for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated.en_US
dc.language.isoengen_US
dc.relation.isversionof10.4028/www.scientific.net/KEM.206-213.1009en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAdditive Contenten_US
dc.subjectGrain Morphologyen_US
dc.subjectProcess Conditionsen_US
dc.titleImprovement of elongated ?-SiAlON ceramics by variation of the processing conditions and amounts of additivesen_US
dc.typeconferenceObjecten_US
dc.relation.journalKey Engineering Materialsen_US
dc.contributor.departmentAnadolu Üniversitesi, Fen Bilimleri Enstitüsü, Seramik Mühendisliği Anabilim Dalıen_US
dc.identifier.volume206-213en_US
dc.identifier.issueIIen_US
dc.identifier.startpage1009en_US
dc.identifier.endpage1012en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorKurama, Semra
dc.contributor.institutionauthorMandal, Hasan


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster