Güncel Gönderiler: Makale Koleksiyonu
Toplam kayıt 99, listelenen: 41-60
-
Designing flow chart for aircraft type training in aviation training process management
(Emerald Group Publishing LTD, 2018)Purpose - Training management has critical in developing of civil aviation sector in Turkey. It requires using serious corporate sources for this reason is directly topic of aviation management and strategy.it is also about ... -
Exergoeconomic analysis of an aircraft turbofan engine
(Inderscience Enterprises LTD, 2009)This study deals with an exergoeconomic analysis of an aircraft turbofan engine utilising the kerosene as fuel. A new parameter is developed to define the trust cost rate. The cost of exergy destruction, the relative cost ... -
Partial substitution of hydrogen for conventional fuel in an aircraft by utilizing unused cargo compartment space
(Pergamon-Elsevier Science LTD, 2010)Options are being actively sought in aviation to switch from petroleum-based fuels to alternative fuels, of which hydrogen is a promising candidate, despite challenges associated with its production and storage. The ... -
Exergy analysis of an air-blasted combustor: an application for atmospheric test rig condition
(Inderscience Enterprises LTD, 2016)Combustion of fuel finds its importance in heating, power production and transportation. The main objective of this study is to assess the performance of an air-blasted combustor using the exergy at different combustor ... -
Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications
(Pergamon-Elsevier Science LTD, 2016)Fuel efficiency of aircraft and helicopter becomes greater concern in recent years caused by rising fuel costs and as well as environmental impact of aviation emissions. Modern helicopters, however, highly complex systems ... -
Component-based exergetic measures of an experimental turboprop/turboshaft engine for propeller aircrafts and helicopters
(Inderscience Enterprises LTD, 2012)In this paper, component-based exergetic assessment is presented for an experimental turboprop/turboshaft engine, including comparisons and exergetic performance such as their efficiencies, improvement potentials, exergy ... -
Exergetic and exergo-economic analysis of a turboprop engine: a case study for CT7-9C
(Inderscience Enterprises LTD, 2012)The turboprop engine has played an important role in short haul commuter and military transport aircraft where high speed is not critical. It may provide the aviation sector with one of the most significant means of achieving ... -
Exergo-sustainability indicators of a turboprop aircraft for the phases of a flight
(Pergamon-Elsevier Science LTD, 2013)One of the key challenges for sustainable aviation is to reduce global and local environmental impacts. The scope of this study is analysed and discussed in detail for better understanding of sustainability performances ... -
Failure analysis of landing gears strut bearings
(Pergamon-Elsevier Science LTD, 2017)This paper analyses TB 20 training aircraft main landing gear attachment bearings which were failed as a result of cracks. Strut bearing is an attachment fitting of landing gear which attached to the wing spar and secures ... -
Sustainability assessment of PW6000 turbofan engine: an exergetic approach
(Inderscience Enterprises LTD, 2014)In this paper, theory, methodology and example application are developed and shown for a PW6000 high-bypass turbofan engine in terms of exergo-sustainable perspective. To obtain exergetic sustainability indicators, first, ... -
Characterization of the interfaces formed at the silicon nitride superalloy joints
(Australian Ceramic Society, 2017)In this study, silicon nitride ceramics (Si3N4) were joined by using a capacitor discharge technique with an Inconel 718 superalloy interlayer and heat-treated in order to determine possible reactions between these two ... -
Identification and quantification of reaction phases at Si3N4-Ti interfaces by using analytical transmission electron microscopy techniques
(Elsevier Sci LTD, 2013)Silicon nitride (Si3N4) and titanium (Ti) were successfully bonded by using a capacitor discharge joining method. The resulting sample interfaces were characterized by scanning electron microscopy (SEM) and analytical ... -
0-1 integer programming model for procedural separation of aircraft by ground holding in ATFM
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2014)This study presents a 0-1 integer programming model for air traffic flow management. The model is used for determining optimum departure times of aircraft so as to avoid aircraft conflicts and to balance capacity and demand ... -
New Model for the Optimization of Runway Orientation
(Asce-Amer Soc Civil Engineers, 2014)One of the most significant factors that affects the location of airport elements is the optimum runway orientation. In this study, a new model called Calculation of Optimum Runway Orientation (CORO) is developed with an ... -
Optlimisatlion of runway orlientatilons for three-runway configurations
(Royal Aeronautical Soc, 2016)Determination of runway orientation is a prime factor affecting the layout of airport facilities. This paper presents a new computer model called TORO (Tool for Optimum Runway Orientation) which is developed with an approach ... -
Comparison of Air Transportation Systems of Turkey and Spain as the Competitors in Tourism Sector
(Akdeniz University, 2017)The growth of air transportation in a country affects positively the development of other industries especially tourism. Turkey and Spain rank among the top countries in the world with their most developed air transportation ... -
Aircraft Sensor and Actuator Fault Detection, Isolation, and Accommodation
(Asce-Amer Soc Civil Engineers, 2011)The purpose of the paper is to present an approach to detect, isolate, and accommodate the aircraft sensor and actuator faults using unknown input observers (UIOs). Full-order observers, reduced-order observers, and UIOs ... -
A new approach to air traffic controller workload measurement and modelling
(Emerald Group Publishing LTD, 2011)Purpose - The purpose of this paper is to develop an analytical approach for workload measurement based on the task times and the changing task priorities of en route air traffic controllers (EATC). Design/methodology/approach ... -
A new standard instrument arrival: the point merge system
(Emerald Group Publishing LTD, 2013)Purpose - The purpose of this paper is to design a new standard instrument arrival called the point merge system (PMS) for converging runways. The PMS enables controllers to handle traffic with no heading instruction, as ... -
Exergetic sustainability assessment of a HALE UAV using dodecene fuel
(Inderscience Enterprises LTD, 2016)Exergetic sustainability performances of a high altitude long endurance (HALE) unmanned aerial vehicle (UAV), having a single turbofan engine and using dodecene as its fuel were investigated all along its flight profile, ...