Ara
Toplam kayıt 90, listelenen: 11-20
An experimental investigation on fly ash based geopolymer bricks
(2008)
Geopolymer bricks were produced by using F type fly ash, C type fly ash, sodium hydroxide solution, sodium silicate solution by means of pressure forming process. Then, the geobricks were heat treated at the temperature ...
The effect of mixing ratio on co-pyrolysis of lignite and rapeseed
(Acta Press Anaheim, 2007)
The biomass and coal mixtures were subjected to fast pyrolysis process to produce biooil. The biooil yield was in the range of I 1.573.1 wt%. depending on the percentage of biomass and coal in the mixture. On the other ...
Recycling of thermal power plant bottom ashes
(2006)
Beneficiation of unburned carbon was conducted in order to increase the possibility of the recycling of coal fired power plant bottom ashes. Two stage flotation techniques were used for this study. In the flotation experiments ...
Contact angle measurements on lignite surface
(2010)
Froth flotation has been widely used for cleaning and desulfurisation of coals for many decades all over the world. There is a close relationship between floatability of minerals and contact angle. Therefore surface ...
Deformation induced dynamic loading for different soil types
(Civil-Comp Press, 2013)
Earthquakes can cause different deformations for different soil types and different earthquake characteristics. Deformations caused by earthquakes can be given as follows: surface rupture, regional subsidence, slope ...
Cartoons on occupational health and safety: Semiotic analysis of workers
(Association of Researchers in Construction Management, 2014)
Construction industry is at the top rankings in developed and developing countries in terms of occupational deaths and injuries. This shows that legal regulations themselves could not decrease occupational accidents. In ...
Effects of shear wall ratio on the seismic behavior of buildings having inadequate seismic resistance
(Earthquake Engineering Research Institute, 2014)
Use of low concrete strength (in some structures as low as 8-10 MPa), structural irregularities, poor detailing in members are some of the significant parameters causing inadequate seismic resistance of deficient RC ...
3D modeling of a river type dam fish passage by CFD
(CRC Press/Balkema, 2016)
Computational Fluid Dynamics (CFD) models provide comprehensive information about the fluid flow around water structures. This paper discusses the CFD solution of a pool type fish passage model and evaluate the results in ...
Analytical study on the seismic performance of a RC building with structural wall during the May 19, 2011 Simav, Turkey Earthquake
(Earthquake Engineering Research Institute, 2014)
Previous studies imply that, after the recent destructive earthquakes reinforced concrete (RC) buildings having structural walls showed better seismic performance than RC buildings in which seismic loads are fully resisted ...
Augmented reality system applications in construction project activities
(2013)
The firms in construction industry could not sufficiently adapt the rapidly emerging information technologies in recent years into their corporate structures. Therefore, in an effort to further exploit the benefits of ...