Ara
Toplam kayıt 88, listelenen: 1-10
Prediction for the Solid Waste Composition by use of Different Curve Fitting Models: A Case Study
(IEEE, 2015)
This study presents a methodology for the prediction of solid waste composition in the urban area based on a set of limited samples. The methodology was applied by a case study for Eskisehir city in Turkey. For this purpose, ...
Pyrolysis of Printed Circuit Board Waste With the Addition of Certain Common Waste Materials
(Parlar Scientific Publications (PSP), 2017)
Every year in Europe, 8.7 million tons of electronic waste is produced, with annual electrical and electronic equipment waste (WEEE) generated in Turkey at 539,000 tons. Most of the WEEE is comprised of printed circuit ...
Modified orange peels for the recovery of silver from waste printed circuit boards
(Agro Arge Danışmanlık San Ve Tic As, 2016)
In this study, it was focused on the silver adsorption from PCB by biosorbents derived from orange peels. In this content, orange peels (OP) were modified by different methods including saponification with NaOH (OP-S), ...
Comparison of Different Modeling Methods of Copper Adsorption by Modified Orange Peels
(Agro Arge Danışmanlık San Ve Tic As, 2016)
Copper (Cu) which has higher electrical and thermal conductivity is an essential element in different sectors. Also, wastes occurred in these sectors contains copper in high amounts. For instance, printed circuit boards ...
Electrochemical Process for the Treatment of Drinking Water
(Parlar Scientific Publications (PSP), 2010)
Removal of fluoride from model water (distilled water + NaF salt + Na(2)SO(4)) by electrocoagulation using iron electrode was investigated in this study. Experiments were conducted to evaluate the effects of current density ...
Adsorption Properties of Activated Carbon From Wild Plant Prepared By Chemical Activation
(Gh Asachi Technical University Iasi, 2015)
Activated carbon was prepared from renewable plant material, that is Euphorbia rigida, by chemical activation using zinc chloride as activating reagents. The adsorption of Basic Blue 9 (BB9) onto activated carbon was ...
Disinfection of Klebsiella pneumoniae using ultrasonic systems
(Triveni Enterprises, 2016)
Disinfection process applied for suppling drinking water plays an important role in public health by preventing the spread of infectious diseases. A number of studies on alternative disinfection technologies, such as ...
Effect of biofiltration process on the control of THMs and HAAs in drinking water
(Taylor & Francis Inc, 2016)
Natural organic matter (NOM) is the precursor of disinfection by-product (DBP) formation potential. In this study, the aim was to investigate NOM removal and chlorinated DBP reduction by the biofiltration process. Different ...
Pyrolysis of Waste Toner Cartridges and Liquid Product Characterization
(Parlar Scientific Publications (PSP), 2017)
Rapid changes in technology have resulted in an increase in the amount of electrical and electronic wastes produced, and this increase has caused disposal problems. Pyrolysis is one method that can be applied to the ...
An evaluation of railway passenger transport in Turkey using life cycle assessment and life cycle cost methods
(Pergamon-Elsevier Science LTD, 2015)
In recent years, Turkey's railway transport system has shown considerable improvement. Today, our country has 12,000 km total rail network; the High Speed Railway (HSR) accounts for 888 km, with the remainder being ...