Ara
Toplam kayıt 12, listelenen: 1-10
Pyrolysis and Catalytic Upgrading of Lignocellulosic Biomass Using Metal Loaded Zsm-5 Zeolite
(Eta-Florence Renewable Energies, 2016)
The present study is aimed to catalytic upgrading of bio-oil obtained from beech wood sawdust pyrolysis over metal-loaded ZSM-5 zeolites. Ni modified ZSM-5 zeolites synthesized with varying metal loading ratios (1-10 wt. ...
Adsorptive removal of phenol from aqueous solutions on activated carbon prepared from tobacco residues: Equilibrium, kinetics and thermodynamics
(Elsevier Science BV, 2011)
This study consists of producing high surface area activated carbon from tobacco residues by chemical activation and its behavior of phenol removal from aqueous solutions. K(2)CO(3) and KOH were used as chemical activation ...
Thermal decomposition behavior of tobacco stem Part II: Kinetic analysis
(Taylor & Francis Inc, 2016)
As a continuation of the previous study on the thermal degradation behavior of tobacco stem, this work is focused on the kinetics of pyrolytic decomposition. Thermogravimetric analysis of tobacco stem samples was conducted ...
Upgrading of fast pyrolysis bio-oil over Fe modified ZSM-5 catalyst to enhance the formation of phenolic compounds
(Pergamon-Elsevier Science LTD, 2017)
The present study is aimed to investigate the upgrading of beech sawdust pyrolysis bio-oil through catalytic cracking of its vapors over Fe-modified ZSM-5 zeolite in a fixed bed tubular reactor. The zeolite supported iron ...
Preparation and surface characterization of activated carbons from Euphorbia rigida by chemical activation with ZnCl2, K2CO3, NaOH and H3PO4
(Elsevier Science BV, 2012)
Preparation of activated carbons from Euphorbia rigida by chemical activation with different impregnation agents and ratios was studied. ZnCl2, K2CO3, NaOH and H3PO4 were used as chemical activation agents and four ...
Synthetic fuel production from tea waste: Characterisation of bio-oil and bio-char
(Elsevier Sci LTD, 2010)
The pyrolysis of tea waste was studied for determining the main characteristics and quantities of liquid and solid products. Particular investigated process variables were temperature (673-973 K), heating rate (5-700 K min ...
Thermal decomposition behavior of tobacco stem Part I: TGA-FTIR-MS analysis
(Taylor & Francis Inc, 2016)
In the present study, the thermal degradation behavior of tobacco stem was examined by means of a thermogravimetric analyzer (TGA) under nitrogen atmosphere at temperature range of 25-1,000 degrees C. The TG curve indicated ...
Optimization of Biodiesel Production and Fuel Properties of Blends
(Taylor & Francis Inc, 2014)
In this study, optimization of essential parameters, such as reaction time, reaction temperature, methanol/oil molar ratio, catalyst amount, and type of biodiesel production via transesterification, were investigated. The ...
Chemically activated carbon production from agricultural waste of chickpea and its application for heavy metal adsorption: equilibrium, kinetic, and thermodynamic studies
(Springer Heidelberg, 2019)
The purpose of this study was to produce activated carbons (ACs) from chickpea (Cicer arietinum) husks by chemical activation (KOH and K2CO3) and to examine their feasibility in removing heavy metals from aqueous solutions. ...
Equilibrium, Thermodynamic, and Kinetic Studies for the Adsorption of Cadmium(II) Ions onto Activated Carbon Prepared from Euphorbia rigida by Chemical Activation
(Taylor & Francis Inc, 2014)
Equilibrium, thermodynamic, and kinetic studies were carried out for the adsorption of cadmium(II) ions from aqueous solution using high surface area (2,613 m(2)/g) microporous activated carbon prepared from Euphorbia ...