Ara
Toplam kayıt 448, listelenen: 41-50
Effect of kaolin type on pyroplastic deformation of sanitaryware porcelain body [Kaolen türünün saglik gereçleri porselen bünyesinin piroplastik deformasyonu üzerine etkisi]
(Gazi Universitesi Muhendislik-Mimarlik, 2016)
Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ...
Thermal Curing Behavior of MWCNT Modified Vinyl Ester-Polyester Resin Suspensions Prepared with 3-Roll Milling Technique
(Wiley, 2009)
This study aims to investigate the curing behavior of a vinyl ester-polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT-NH2). For this ...
Polarized emission from CsPbBr3 nanowire embedded-electrospun PU fibers
(IOP Publishing LTD, 2018)
Interest in all-inorganic halide perovskites has been increasing dramatically due to their high quantum yield, band gap tunability, and ease of fabrication in compositional and geometric diversity. In this study, we ...
Carbon nanotube/boehmite-derived alumina ceramics obtained by hydrothermal synthesis and spark plasma sintering (SPS)
(Elsevier Sci LTD, 2010)
Preparation, structure and properties of hydrothermally treated carbon nanotube/boehmite (CNT/gamma-AlOOH) and densification with spark plasma sintering of Al2O3 and CNT/Al2O3 nanocomposites were investigated. Hydrothermal ...
Alternating current electrophoretic deposition of HA and hBN nanoparticles on Ti substrate
(2017)
Hydroxyapatite (HA) and hexagonal boron nitride (hBN) are biocompatible materials. In this study, nano HA and nano hBN particles were used for coatings on titanium (Ti) substrate. The nanoparticles were deposited on Ti ...
Effect of passivation and precipitation hardening on processing and mechanical properties of B4C-Al composites
(Elsevier Sci LTD, 2011)
Boron carbide aluminium composites were produced by infiltrating aluminium alloys into porous boron carbide preforms at different temperatures under an argon gas atmosphere. Aim of this study was controlling the reaction ...
Thermal shock behaviour of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)
Thermal shock behaviour of alumina-mullite-zircon refractories was investigated by varying zircon content. Thermal shock parameters R and R-st based on the room temperature mechanical measurements were calculated as a ...
The influence of fine alumina particles on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories
(Trans Tech Publications LTD, 2004)
The object of this work is to improve understanding of relationships between microstructure and those mechanical properties likely to affect thermal shock behaviour of slip-cast alumina-mullite refractories. The incorporation ...
The characterization and the utilization of the waste clays from gümüşköy silver mine in brick industry
(2004)
In this study, the main characteristics and technological properties of the waste clays from silver deposit located in the northern part of Kutahya (mid-south of Turkey) are presented. The clays were characterized by X-ray ...
The utilization of waste clay from coal basin in the wall tile body formulation
(Trans Tech Publications LTD, 2004)
In this study, the waste clays extracted from coal basin were used as a wall tile ingredient instead of the clay materials of the standardized biscuit formulation of the wall tile. XRD data show that waste clay contains ...