Başlık için Bildiri Koleksiyonu listeleme
Toplam kayıt 150, listelenen: 78-97
-
Mechanical properties of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)The relationships between mechanical properties and microstructure of alumina-mullite-zircon refractories were investigated by varying zircon content. Various sintering temperatures were used for the slip-cast refractories ... -
Mg+2 and Ce+3 doped ?-SiAlON ceramics
(2004)In the present work, stabilization of MgO and CeO2 in ?-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830°C for 1 hour in gas pressure sintering furnace ... -
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ... -
Microstructural Characterisation and Investigation of the Effects of ZrSiO4-Y2O3 Additions on Corrosion Behaviour of MgO-Spinel Composite Refractories
(Trans Tech Publications LTD, 2012)Corrosion resistance of MgO-Spinel (M-S) composite refractories containing various amounts of ZrSiO4-Y2O3 constituents was investigated. Density and open porosity values were measured and evaluated. Corrosion tests of ... -
Microstructural evolution R-?-SiAlON ceramics (R=Y, Y+Sm and Sm)
(2004)Yttrium or samarium doped ?-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800°C and then held for 1h while another group of ... -
Microstructural evolution R-alpha-SiAlON ceramics (R=Y, Y+Sm and Sm)
(Trans Tech Publications LTD, 2004)Yttrium or samarium doped alpha-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800degreesC and then held for 1 h while another ... -
Microstructure-permeability relation of porous beta-Si3N4 ceramics
(Elsevier Sci LTD, 2013)Porous beta-Si3N4 ceramics with two distinct structures were produced by using two different Si3N4 sources to investigate the relationship between microstructure and permeability. Results showed that regardless of pore ... -
A Novel Approach For Preparing Electrically Conductive SiAlON-TiN Composites by Spark Plasma Sintering
(Trans Tech Publications LTD, 2009)An effective approach for preparing electrically conductive SiAlON-TiN composites was developed. Granules of a designed composition of alpha-beta SiAlON was obtained by spray drying and coated with varying amounts of TiO(2) ... -
Optimization of ?-sialon microstructure by heat treatment
(2008)Nd-doped ?-SiAlON starting composition (Nd0.33Si 9.38Al2.62O1.62N14.38) was prepared by gas pressure sintering at 1825°C for 3 hrs. In order to explore the effect of post heat treatment on the developments of elongated ... -
Optimization of alpha-sialon microstructure by heat treatment
(Trans Tech Publications LTD, 2008)Nd-doped alpha-SiAlON starting composition (Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38)) was prepared by gas pressure sintering at 1825 degrees C for 3 hrs. In order to explore the effect of post heat treatment on the developments ... -
Optimization of the optical properties of alpha-SiAlON through a decrease in starting powder size
(Elsevier Sci LTD, 2015)In the present work, the effects of initial powder size on the sintering behavior and optical properties of Dy-alpha-SiAlON ceramics produced by the SPS technique are investigated. The powders were prepared using high ... -
A Preliminary Study on Cell Wall Architecture of Titanium Foams
(Materials Research Soc, 2009)Bio-inspired architectures, especially metallic foams, have been receiving an increasing interest for the last 10 years due to their unusual mechanical properties. Among commonly dealt foamed metals, like aluminum and ... -
Preparation of cordierite ceramics from talc with boron oxide addition
(2004)Thermal reactions of impure materials of talc, silica and alumina with moderate particle sizes were investigated to obtain a dense cordierite ceramic by boron oxide addition as a sintering aid. Mixed powders were uniaxially ... -
Preparation, Characterization and Catalytic Properties of SBA-15-SO3H Supported Tungstophosphoric Acid for Esterification Reaction
(Polish Acad Sciences Inst Physics, 2017)SBA-15-SO3H supported tungstophosphoric acid (TPA, H3PW12O40) mesoporous materials were synthesized by impregnation of TPA into the hydrothermally synthesized SBA-15-SO3H and the catalytic performances were compared for ... -
Pressing behaviour of spray dried alumina-zirconia granules
(Trans Tech Publications LTD, 2004)In this study, spray drying of alumina-zirconia slurries on a pilot scale, and their pressing behaviour were investigated. Slurries were prepared at 50 wt-% solid loading. An acrylic polymer emulsion, polyethylene glycol, ... -
Pressureless Melt Infiltrated Non-Oxide Ceramic-Metal Composites
(Trans Tech Publications LTD, 2009)In the present study highly dense (open porosity < 1 %), light-weight (d <= 2.85 g/cm(3)) and Al(4)C(3)-free non-oxide ceramic-metal composites were produced at comparatively low temperatures (<= 1250 degrees C) by pressurless ... -
Pressureless sintering of Al2O3-TiCN composites
(Trans Tech Publications LTD, 2004)A composition of 70 wt % Al2O3 + 30 wt % TiCN was prepared and pressureless-sintered at temperatures ranging from 1700 to 1840degreesC. In order to achieve densification, a powder bed was also employed. The resultant ... -
Pressureless sintering of hexagonal boron nitride powders
(Trans Tech Publications LTD, 2007)Pressureless sintering of hexagonal boron nitride (BN) with and without additives was performed using a powder which was previously nitrided at 900 degrees C and then heat treated at 1400 degrees C. Sintering additives ... -
Producing cordierite from local magnesium sources
(Trans Tech Publications LTD, 2004)Cordierite ceramics were produced by using local magnesium sources. Mixtures were sintered at different temperatures to examine formation of cordierite. a-cordierite was formed as a major phase over 1150degreesC. High bulk ... -
Production and characterisation of pigments produced using grinding waste from cast iron foundry
(Trans Tech Publications LTD, 2004)The brown and black pigments are generally synthesised from different powders such as iron (111) and chromium (111) oxide powders. In this study, iron-chromium pigments by using grinding waste from cast iron foundry as ...