Browsing Bildiri Koleksiyonu by Title
Now showing items 71-90 of 150
-
Joining of SiAlON ceramics to pyrex glass
(Belgian Ceramic Society, 2004)In the present study, pressureless joining of gas pressure sintered (alpha-beta)-SiAlON ceramics to pyrex glass was investigated. Preoxidized SiAlON ceramics were used to enhance wettability and provide chemical compatibility ... -
Lanthanum titanate (La2Ti2O7) as an interphase material in alumina (Al2O3) based composites
(Trans Tech Publications LTD, 2004)The aim of this research is to fabricate and characterize alumina (Al2O3) / lanthanum titanate (La2Ti2O7) laminate ceramic composites. The interfacial bond between oxide laminates has a critical effect on the final mechanical ... -
LPG sensing characteristics of electrospray deposited SnO2 nanoparticles
(Elsevier Science BV, 2014)In this study, SnO2 films were fabricated on conductive substrate such as aluminum and platinum coated alumina using electro-spray deposition (ESD) method for gas sensor applications. Solution flow rate, coating time, ... -
Magnetic Mesoporous Silica Nanocomposite for Biodiesel Production
(Polish Acad Sciences Inst Physics, 2017)Ordered mesoporous silicas can be utilized as support because of having large surface area, tunable porosity, uniform pore size distribution, high thermal stability and modifiable properties. However, these materials ... -
Materials for high performance cymbal transducers
(Springer, 2004)The effects of materials on the performance of the cymbal-type flextensional transducers were investigated under in-air and water-loaded conditions by finite element analysis (FEA) methods. At the initial stage, FEA and ... -
Mechanical characterization of highly porous beta-Si3N4 ceramics fabricated via partial sintering & starch addition
(Elsevier Sci LTD, 2013)In this study, porous beta-Si3N4 ceramics containing limited amount of Sm2O3 and CaO as sintering aids were produced by addition of potato starch (10 and 20 vol.%) and partial sintering. Two different Si3N4 powders, alpha- ... -
Mechanical properties and thermal shock behaviour of model MgO-MgAl 2O4 spinel composite refractories
(2006)The effects of varying the amounts (5 to 30 wt%) and particle sizes of magnesium aluminate spinel (i.e. preformed and in-situ formed) incorporated in a fully dense MgO, were investigated. Mechanical properties were measured ... -
Mechanical properties of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)The relationships between mechanical properties and microstructure of alumina-mullite-zircon refractories were investigated by varying zircon content. Various sintering temperatures were used for the slip-cast refractories ... -
Mg+2 and Ce+3 doped ?-SiAlON ceramics
(2004)In the present work, stabilization of MgO and CeO2 in ?-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830°C for 1 hour in gas pressure sintering furnace ... -
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ... -
Microstructural Characterisation and Investigation of the Effects of ZrSiO4-Y2O3 Additions on Corrosion Behaviour of MgO-Spinel Composite Refractories
(Trans Tech Publications LTD, 2012)Corrosion resistance of MgO-Spinel (M-S) composite refractories containing various amounts of ZrSiO4-Y2O3 constituents was investigated. Density and open porosity values were measured and evaluated. Corrosion tests of ... -
Microstructural evolution R-?-SiAlON ceramics (R=Y, Y+Sm and Sm)
(2004)Yttrium or samarium doped ?-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800°C and then held for 1h while another group of ... -
Microstructural evolution R-alpha-SiAlON ceramics (R=Y, Y+Sm and Sm)
(Trans Tech Publications LTD, 2004)Yttrium or samarium doped alpha-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800degreesC and then held for 1 h while another ... -
Microstructure-permeability relation of porous beta-Si3N4 ceramics
(Elsevier Sci LTD, 2013)Porous beta-Si3N4 ceramics with two distinct structures were produced by using two different Si3N4 sources to investigate the relationship between microstructure and permeability. Results showed that regardless of pore ... -
A Novel Approach For Preparing Electrically Conductive SiAlON-TiN Composites by Spark Plasma Sintering
(Trans Tech Publications LTD, 2009)An effective approach for preparing electrically conductive SiAlON-TiN composites was developed. Granules of a designed composition of alpha-beta SiAlON was obtained by spray drying and coated with varying amounts of TiO(2) ... -
Optimization of ?-sialon microstructure by heat treatment
(2008)Nd-doped ?-SiAlON starting composition (Nd0.33Si 9.38Al2.62O1.62N14.38) was prepared by gas pressure sintering at 1825°C for 3 hrs. In order to explore the effect of post heat treatment on the developments of elongated ... -
Optimization of alpha-sialon microstructure by heat treatment
(Trans Tech Publications LTD, 2008)Nd-doped alpha-SiAlON starting composition (Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38)) was prepared by gas pressure sintering at 1825 degrees C for 3 hrs. In order to explore the effect of post heat treatment on the developments ... -
Optimization of the optical properties of alpha-SiAlON through a decrease in starting powder size
(Elsevier Sci LTD, 2015)In the present work, the effects of initial powder size on the sintering behavior and optical properties of Dy-alpha-SiAlON ceramics produced by the SPS technique are investigated. The powders were prepared using high ... -
A Preliminary Study on Cell Wall Architecture of Titanium Foams
(Materials Research Soc, 2009)Bio-inspired architectures, especially metallic foams, have been receiving an increasing interest for the last 10 years due to their unusual mechanical properties. Among commonly dealt foamed metals, like aluminum and ... -
Preparation of cordierite ceramics from talc with boron oxide addition
(2004)Thermal reactions of impure materials of talc, silica and alumina with moderate particle sizes were investigated to obtain a dense cordierite ceramic by boron oxide addition as a sintering aid. Mixed powders were uniaxially ...