Yazar "Mandal, Hasan" için Bildiri Koleksiyonu listeleme
-
Development of alpha-beta SiAlON ceramics from different Si3N4 starting powders
Açıkbaş, N. Çalış; Kara, Ferhat; Mandal, Hasan (Trans Tech Publications LTD, 2009)alpha-beta SiAlON ceramics were produced from different starting Si3N4 powders including beta-Si3N4 and alpha-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, ... -
Development of laminar type functionally graded SiAlON ceramics
Çalış, N; Kara, Alpagut; Kara, Ferhat; Mandal, Hasan (Trans Tech Publications LTD, 2004)In order to combine high hardness with high toughness, laminar type (two layers) functionally graded (FGM) SiAlON ceramics were developed. In a previous study achieved by the same authors, presence of a sharp transition ... -
Development strategies for sialon ceramics
SiAlON ceramics have a wide range of applications due to their favorable mechanical and thermal properties. They are one of the main groups of materials being considered for high temperature load bearing applications and ... -
Effect of different nucleation temperatures on the microstructural development of ?-SiAlON ceramics
Kuşhan, Seniz Reyhan; Mandal, Hasan (2004)?-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ... -
Effect of different nucleation temperatures on the microstructural development of alpha-SiAlON ceramics
Kuşhan, Seniz Reyhan; Mandal, Hasan (Trans Tech Publications LTD, 2004)alpha-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ... -
Formation of ?-SiAlON ceramics containing scandium
Kurama, Semra; Mandal, Hasan (2004)?-SiAlON is able to accommodate cations into its crystal structure if the cations are sufficiently small in size, thus helping to reduce the volume of the remnant grain boundary phase after processing. Lutetium with an ... -
Formation of alpha-SiAlON ceramics containing scandium
Kurama, Semra; Mandal, Hasan (Trans Tech Publications LTD, 2004)alpha-SiAlON is able to accommodate cations into its crystal structure if the cations are sufficiently small in size, thus helping to reduce the volume of the remnant grain boundary phase after processing. Lutetium with ... -
Functionally graded SiAlON ceramics
Çalış, N; Kuşhan, Seniz Reyhan; Kara, Ferhat; Mandal, Hasan (Elsevier Sci LTD, 2004)Functionally graded SiAlON ceramics were developed by three different methods to improve the mechanical properties of SiAlONs; powder bed, rapid cooling and laminating. beta-SiAlON compacts were embedded in two different ... -
Influence of type of cations on intergranular phase crystallisation of SiAlON ceramics
Açıkbaş, N. Çalış; Kara, Alpagut; Turan, Servet; Kara, Ferhat; Mandal, Hasan; Bitterlich, B. (Trans Tech Publications LTD, 2007)25 alpha:75 beta SiAION composition was designed with different cations and at different molar ratios. Effect of the type of cations both on the composition and the type of intergranular phase investigated after gas pressure ... -
Interactions Between AlN and SiAlON Ceramics
Kalemtaş, Ayşe; Acikbas, N. Çalış; Kara, Ferhat; Mandal, Hasan; Krnel, K.; Kosmac, T. (Trans Tech Publications LTD, 2009)In the present study, interactions between AlN and SiAlON laminated couples were investigated after gas pressure (GPS) and spark plasma sintering (SPS) by scanning electron microscopy (SEM) and energy dispersive x-ray ... -
Joining of SiAlON ceramics to pyrex glass
Kalemtaş, Ayşe; Kara, Alpagut; Kara, Ferhat; Mandal, Hasan; Aktug, B (Belgian Ceramic Society, 2004)In the present study, pressureless joining of gas pressure sintered (alpha-beta)-SiAlON ceramics to pyrex glass was investigated. Preoxidized SiAlON ceramics were used to enhance wettability and provide chemical compatibility ... -
Mechanical characterization of highly porous beta-Si3N4 ceramics fabricated via partial sintering & starch addition
Kalemtaş, Ayşe; TopAteş, Gülsüm; özcoban, Hüseyin; Mandal, Hasan; Kara, Ferhat; Janssen, Rolf (Elsevier Sci LTD, 2013)In this study, porous beta-Si3N4 ceramics containing limited amount of Sm2O3 and CaO as sintering aids were produced by addition of potato starch (10 and 20 vol.%) and partial sintering. Two different Si3N4 powders, alpha- ... -
Mg+2 and Ce+3 doped ?-SiAlON ceramics
Kurama, Semra; Mandal, Hasan (2004)In the present work, stabilization of MgO and CeO2 in ?-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830°C for 1 hour in gas pressure sintering furnace ... -
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
Kurama, Semra; Mandal, Hasan (Trans Tech Publications LTD, 2004)In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ... -
Microstructural evolution R-?-SiAlON ceramics (R=Y, Y+Sm and Sm)
Kurama, Semra; Mandal, Hasan (2004)Yttrium or samarium doped ?-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800°C and then held for 1h while another group of ... -
Microstructural evolution R-alpha-SiAlON ceramics (R=Y, Y+Sm and Sm)
Kurama, Semra; Mandal, Hasan (Trans Tech Publications LTD, 2004)Yttrium or samarium doped alpha-SiAlON composition was sintered using gas pressure sintering through two different sintering procedures. One group of samples was heated up to 1800degreesC and then held for 1 h while another ... -
Microstructure-permeability relation of porous beta-Si3N4 ceramics
Topateş, Gülsüm; Mammitzsch, Lars; Petasch, Uwe; Adler, Joerg; Kara, Ferhat; Mandal, Hasan (Elsevier Sci LTD, 2013)Porous beta-Si3N4 ceramics with two distinct structures were produced by using two different Si3N4 sources to investigate the relationship between microstructure and permeability. Results showed that regardless of pore ... -
Pressing behaviour of spray dried alumina-zirconia granules
Kara, Ferhat; Kara, Alpagut; Turan, Servet; Mandal, Hasan (Trans Tech Publications LTD, 2004)In this study, spray drying of alumina-zirconia slurries on a pilot scale, and their pressing behaviour were investigated. Slurries were prepared at 50 wt-% solid loading. An acrylic polymer emulsion, polyethylene glycol, ... -
Producing cordierite from local magnesium sources
Topateş, Gülsüm; Mandal, Hasan (Trans Tech Publications LTD, 2004)Cordierite ceramics were produced by using local magnesium sources. Mixtures were sintered at different temperatures to examine formation of cordierite. a-cordierite was formed as a major phase over 1150degreesC. High bulk ... -
Production of alpha-beta SiAlON-TiN/TiCN composites by gas pressure sintering
Ayas, Erhan; Kara, Alpagut; Mandal, Hasan; Turan, Servet; Kara, Ferhat (Belgian Ceramic Society, 2004)Due to the favorable properties possessed by novel alpha-beta SiAlONs, they are attractive materials for cutting tool applications. Such applications require materials with high hardness, high fracture toughness and high ...