Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKalemtaş, Ayşe
dc.contributor.authorArslan, Gürsoy
dc.contributor.authorKaya, Pınar
dc.contributor.authorTuran, Servet
dc.contributor.authorKara, Ferhat
dc.date.accessioned2019-10-21T21:12:39Z
dc.date.available2019-10-21T21:12:39Z
dc.date.issued2018
dc.identifier.issn1229-9162
dc.identifier.urihttps://hdl.handle.net/11421/21426
dc.descriptionWOS: 000437250600006en_US
dc.description.abstractIn this study, highly dense (>97%) in-situ SiC reinforced AlN based ceramic-metal composites were produced by pressureless reactive infiltration of 7075 aluminium alloys into porous alpha-Si3N4, alpha-Si3N4 + 4 wt. % carbon and alpha-Si3N4 + 8 wt. % carbon preforms at 1400 degrees C for 4 hours under an argon gas atmosphere. X-ray diffraction and transmission electron microscopy analysis of the designed alpha-Si3N4-Al and alpha-Si3N4-C-Al composites revealed that Si3N4 was completely consumed during the infiltration process via reacting with the Al alloy and resulted in the formation of AlN and Si phases. The aim of the current work was to introduce a novel method to produce in-situ SiC reinforced AlN based ceramic-metal composites. Composites with relatively low metal contents were successfully fabricated through incorporating active carbon to the starting alpha-Si3N4 powder, which in turn consumes the liberated metallic Si phase in the system via chemical reactions leading to the formation of SiC ceramic phase. Formation of in-situ SiC, AlN and metallic Si were also confirmed by analytical transmission electron microscopy investigations.en_US
dc.description.sponsorshipAnadolu University Scientific Research Council [060203]; Scientific & Technological Research Council of Turkey (TUBITAK) [108M194]en_US
dc.description.sponsorshipWe are grateful to the Anadolu University Scientific Research Council (Project No: 060203) and The Scientific & Technological Research Council of Turkey (TUBITAK) (Project No: 108M194) for funding the present work. We would also like to thank Dr. Hilmi Yurdakul for his help on the TEM investigations and Serkan Ulukut for TEM sample preparation.en_US
dc.language.isoengen_US
dc.publisherKorean Assoc Crystal Growth, Incen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCeramic-Metal Compositesen_US
dc.subjectSi3N4en_US
dc.subjectAlnen_US
dc.subjectSicen_US
dc.subjectReactive Infiltrationen_US
dc.subjectIn-Situ Reactionsen_US
dc.titleProcessing of in-situ SiC reinforced AlN based compositesen_US
dc.typearticleen_US
dc.relation.journalJournal of Ceramic Processing Researchen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume19en_US
dc.identifier.issue2en_US
dc.identifier.startpage119en_US
dc.identifier.endpage125en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorArslan, Gürsoy
dc.contributor.institutionauthorTuran, Servet
dc.contributor.institutionauthorKara, Ferhat


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster