Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKaracaoğlu, Erkul
dc.contributor.authorKarasu, Bekir
dc.date.accessioned2019-10-22T16:58:38Z
dc.date.available2019-10-22T16:58:38Z
dc.date.issued2013
dc.identifier.issn0025-5408
dc.identifier.issn1873-4227
dc.identifier.urihttps://dx.doi.org/10.1016/j.materresbull.2013.05.078
dc.identifier.urihttps://hdl.handle.net/11421/21533
dc.descriptionWOS: 000324077700009en_US
dc.description.abstractInorganic phosphorescent pigments have a very wide application, consisting of ceramic decoration and glazes. Therefore, in the present study 3 different commercially available strontium aluminate phosphors (coded Phosphor A, B and C) emitting yellowish-green light were investigated to determine their behaviour when re-fired under oxidizing atmosphere. The phosphors were re-fired at 10 different temperatures and consequent effects were studied. All the samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), laser particle size, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer analysis. It was found that firing them under oxidizing atmosphere strongly affected their phosphorescence abilities especially over 800-900 degrees C, because doped europium ions (Eu2+) in their structures are oxidized to Eu3+. It was also concluded that the phosphor powders clumped as the temperature rose, leading to their particle size distributions to changeen_US
dc.language.isoengen_US
dc.publisherPergamon-Elsevier Science LTDen_US
dc.relation.isversionof10.1016/j.materresbull.2013.05.078en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCeramicsen_US
dc.subjectX-Ray Diffractionen_US
dc.subjectCrystal Structureen_US
dc.subjectLuminescenceen_US
dc.subjectPhosphorsen_US
dc.titleThe effects of re-firing process under oxidizing atmosphere and temperatures on the properties of strontium aluminate phosphorsen_US
dc.typearticleen_US
dc.relation.journalMaterials Research Bulletinen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume48en_US
dc.identifier.issue10en_US
dc.identifier.startpage3702en_US
dc.identifier.endpage3706en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorKarasu, Bekir


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster