Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorYungevis, Hasan
dc.contributor.authorÖzel, Emel
dc.date.accessioned2019-10-22T16:58:44Z
dc.date.available2019-10-22T16:58:44Z
dc.date.issued2013
dc.identifier.issn0272-8842
dc.identifier.issn1873-3956
dc.identifier.urihttps://dx.doi.org/10.1016/j.ceramint.2012.12.062
dc.identifier.urihttps://hdl.handle.net/11421/21594
dc.descriptionWOS: 000318577600097en_US
dc.description.abstractIn this study, CoFe2O4 pigments were synthesised using both co-precipitation and conventional ceramic methods. Pigment particles prepared using the conventional ceramic method were subsequently milled to submicron size. The effects of the solvent, dispersant and milling type in the milling process were investigated. This study showed that planetary milling in a diethylene glycol (DEG) medium with sodium tripolyphosphate (STPP) was an effective method for producing submicron-sized pigment powders from pigments synthesised using the conventional method. With this method, submicron-sized pigment particles (approximately 190 nm) were obtained after milling for 4 h. Planetary milling was more efficient in reducing particle size compared to attrition milling. Co-precipitated pigment had a more intense black colour, due to the nanoscale particle size ( < 100 nm). However, conventional ceramic pigments also had an adequately intense black colour that increased after milling compared to unmilled conventional pigments. When considering production of industrial scale submicron-sized pigments, the milling of these pigments to submicron size can be a good alternative method for the production of ink colourantsen_US
dc.description.sponsorshipTUBiTAK Research Foundation [110M422]en_US
dc.description.sponsorshipWe would like to thank the TUBiTAK Research Foundation for their support for this research under Contract number 110M422.en_US
dc.language.isoengen_US
dc.publisherElsevier Sci LTDen_US
dc.relation.isversionof10.1016/j.ceramint.2012.12.062en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMillingen_US
dc.subjectCofe2O4 Pigmentsen_US
dc.subjectCo-Precipitation Methoden_US
dc.subjectConventional Ceramic Methoden_US
dc.titleEffect of the milling process on the properties of CoFe2O4 pigmenten_US
dc.typearticleen_US
dc.relation.journalCeramics Internationalen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume39en_US
dc.identifier.issue5en_US
dc.identifier.startpage5503en_US
dc.identifier.endpage5511en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster