Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorAçıkbaş, N. Çalış
dc.contributor.authorYurdakul, Hilmi
dc.contributor.authorMandal, Hasan
dc.contributor.authorKara, Ferhat
dc.contributor.authorTuran, Servet.
dc.contributor.authorKara, Alpagut
dc.contributor.authorBitterlich, B.
dc.date.accessioned2019-10-22T16:58:54Z
dc.date.available2019-10-22T16:58:54Z
dc.date.issued2012
dc.identifier.issn0955-2219
dc.identifier.issn1873-619X
dc.identifier.urihttps://dx.doi.org/10.1016/j.jeurceramsoc.2011.11.030
dc.identifier.urihttps://hdl.handle.net/11421/21668
dc.descriptionWOS: 000302846400004en_US
dc.description.abstractThe properties of SiAlON ceramics are strongly affected by the composition and structure of the intergranular phase, which are controlled by dopants, sintering conditions and starting silicon nitride (Si3N4) powder characteristics. In this study, 25 alpha:75 beta SiAlON compositions were designed with different molar ratios of Y:Srn:Ca (9:0.5:0.5 and 3:6:1). The effects of cation ratios, different cooling profiles (50 degrees C/min and 5 degrees C/min) and further heat treatment under different conditions (at 1600 degrees C for 2, 4 and 6 h) on the final phase composition, the type of the intergranular phase (amorphous or crystalline) formation, the resulting microstructures and the machining performance were studied. It is found that slow cooling and heat treatment have a great influence on crystallisation behaviour and in turn the crystallisation enhance the machining performance of SiAlON materials in cutting tool applications. Crown Copyright All rights reserved.en_US
dc.description.sponsorshipTurkish Scientific and Technological Research Council [TUBITAK-TEYDEB-3040287]en_US
dc.description.sponsorshipThe authors wish to acknowledge the financial support of the Turkish Scientific and Technological Research Council in the scope of TUBITAK-TEYDEB-3040287 Project.en_US
dc.language.isoengen_US
dc.publisherElsevier Sci LTDen_US
dc.relation.isversionof10.1016/j.jeurceramsoc.2011.11.030en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSialonen_US
dc.subjectCationen_US
dc.subjectHeat Treatmenten_US
dc.subjectCrystallisationen_US
dc.subjectTem Characterisationen_US
dc.subjectPropertiesen_US
dc.titleEffect of sintering conditions and heat treatment on the properties, microstructure and machining performance of alpha-beta-SiAlON ceramicsen_US
dc.typearticleen_US
dc.relation.journalJournal of the European Ceramic Societyen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume32en_US
dc.identifier.issue7en_US
dc.identifier.startpage1321en_US
dc.identifier.endpage1327en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorMandal, Hasan
dc.contributor.institutionauthorKara, Ferhat
dc.contributor.institutionauthorTuran, Servet.
dc.contributor.institutionauthorKara, Alpagut


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster