dc.contributor.author | Kurama, Semra | |
dc.contributor.editor | Pan, W | |
dc.contributor.editor | Gong, JH | |
dc.date.accessioned | 2019-10-22T16:59:05Z | |
dc.date.available | 2019-10-22T16:59:05Z | |
dc.date.issued | 2008 | |
dc.identifier.issn | 1013-9826 | |
dc.identifier.uri | https://dx.doi.org/10.4028/www.scientific.net/KEM.368-372.891 | |
dc.identifier.uri | https://hdl.handle.net/11421/21740 | |
dc.description | 5th China International Conference on High-Performance Ceramics (CICC-5) -- MAY 10-13, 2007 -- Changsha, PEOPLES R CHINA | en_US |
dc.description | WOS: 000254883200281 | en_US |
dc.description.abstract | Nd-doped alpha-SiAlON starting composition (Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38)) was prepared by gas pressure sintering at 1825 degrees C for 3 hrs. In order to explore the effect of post heat treatment on the developments of elongated (alpha-SiAlON grains, sample was heat treated at 1800 degrees C for 4-12 hrs. It was found that post heat treatments promoted formation of the elongated alpha-SiAlON grains. The controlling mechanism of grain growth was determined via plotting on a graph the growth in width/length versus time graphics using Image Analysis method. Different growth rates were found between the length and width direction of the alpha-SiAlON crystals, resulting in anisotropic grain growth in the microstructural development. | en_US |
dc.description.sponsorship | Chinese Ceram Soc | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Trans Tech Publications LTD | en_US |
dc.relation.ispartofseries | Key Engineering Materials | |
dc.relation.isversionof | 10.4028/www.scientific.net/KEM.368-372.891 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Sialon | en_US |
dc.subject | Heat Treatment | en_US |
dc.subject | Image Analyze | en_US |
dc.subject | Lsw Theory | en_US |
dc.title | Optimization of alpha-sialon microstructure by heat treatment | en_US |
dc.type | conferenceObject | en_US |
dc.relation.journal | High-Performance Ceramics V, Pts 1 and 2 | en_US |
dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü | en_US |
dc.identifier.volume | 368-372 | en_US |
dc.identifier.startpage | 891 | en_US |
dc.identifier.endpage | 893 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.contributor.institutionauthor | Kurama, Semra | |