Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorDoğan, Aydın
dc.contributor.authorGünkaya, Göktuğ
dc.contributor.authorSuvacı, Ender
dc.contributor.authorNiederberger, Markus
dc.date.accessioned2019-10-22T16:59:09Z
dc.date.available2019-10-22T16:59:09Z
dc.date.issued2006
dc.identifier.issn0022-2461
dc.identifier.urihttps://dx.doi.org/10.1007/s10853-006-0583-9
dc.identifier.urihttps://hdl.handle.net/11421/21763
dc.description2nd International Conference on Electrophoretic Deposition - Fundamentals and Applications -- JUN, 2005 -- Barga, ITALYen_US
dc.descriptionWOS: 000242510700023en_US
dc.description.abstractIn this study, a non-aqueous method in a simple one pot reaction process was employed to synthesize nano-sized BaTiO3 particles and then electrophoretic deposition technique was employed for thin film coatings. In the first step of the preparation, metallic barium is directly dissolved in benzyl alcohol at slightly elevated temperatures. Then titanium isopropoxide was added following by a solvothermal treatment. At the end of the reaction, nearly spherical BaTiO3 nanoparticles were obtained typically 5 nm in diameter. After establishing the stability of the BaTiO3 suspension in ethanol, electrophoretic deposition process was performed without any additional operation. Alumina with platinum plating was used as substrate. To achieve the optimal process parameters, various voltages were applied by altering the cathode to anode distance as well as deposition time. High voltages application was possible without causing hydrolysis, because of the non-aqueous ethanol medium with higher surface charge of the nanoparticles. The deposited surface coatings were dried in air and sintered at various temperatures. SEM, EDX and XRD analysis were employed for the investigation of the coating.en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s10853-006-0583-9en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.titleElectrophoretic deposition of nano-sized BaTiO3en_US
dc.typeconferenceObjecten_US
dc.relation.journalJournal of Materials Scienceen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume41en_US
dc.identifier.issue24en_US
dc.identifier.startpage8196en_US
dc.identifier.endpage8201en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorDoğan, Aydın
dc.contributor.institutionauthorGünkaya, Göktuğ
dc.contributor.institutionauthorSuvacı, Ender


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster