Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorUzunonat, Y.
dc.date.accessioned2019-10-23T17:55:57Z
dc.date.available2019-10-23T17:55:57Z
dc.date.issued2017
dc.identifier.isbn9783035710281
dc.identifier.issn0255-5476
dc.identifier.urihttps://dx.doi.org/10.4028/www.scientific.net/MSF.890.339
dc.identifier.urihttps://hdl.handle.net/11421/22772
dc.description5th International Conference on Material Science and Engineering Technology, ICMSET 2016 -- 29 October 2016 through 31 October 2016 -- -- 190139en_US
dc.description.abstractIn this work, Charpy notch pendulum impact test was performed on non-welded and TIG (Tungsten Inert Gas) welded Inconel 718 specimens at three different temperatures as 20°C, 500°C and 700°C. After the completion of tests, SEM (Scanning Electron Microscopy) inspection and EDX (Energy-Dispersive X-Ray Spectroscopy) analysis were performed for the microstructural examination of the specimens. Hardness measurements on the rupture zone of selected welded and non-welded specimens were also performed to make a better approach to interpretation of the impact behavior of material. Inspections indicated that hardness values in the heat affected zone of welded specimens dramatically decreased and they displayed higher ductility during fracture than non-welded samples due to partial softening of structure. The reason of further decrease in impact resistance of welded specimens was explained as the precipitation and coarsening of ?'' and carbide phases in the interdendritic regions with increasing temperatureen_US
dc.language.isoengen_US
dc.publisherTrans Tech Publications Ltden_US
dc.relation.isversionof10.4028/www.scientific.net/MSF.890.339en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHardnessen_US
dc.subjectImpact Resistanceen_US
dc.subjectInconel 718en_US
dc.subjectTig Weldingen_US
dc.subjectWelding Microstructureen_US
dc.titleInvestigation of impact behavior of TIG welded inconel 718 at aircraft engine operating temperaturesen_US
dc.typeconferenceObjecten_US
dc.relation.journalMaterials Science Forumen_US
dc.contributor.departmentAnadolu Üniversitesi, Ulaştırma Meslek Yüksekokuluen_US
dc.identifier.volume890 MSFen_US
dc.identifier.startpage339en_US
dc.identifier.endpage343en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US]


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster