Ara
Toplam kayıt 57, listelenen: 1-10
Production of alpha-beta SiAlON-TiN/TiCN composites by gas pressure sintering
(Belgian Ceramic Society, 2004)
Due to the favorable properties possessed by novel alpha-beta SiAlONs, they are attractive materials for cutting tool applications. Such applications require materials with high hardness, high fracture toughness and high ...
Polarized emission from CsPbBr3 nanowire embedded-electrospun PU fibers
(IOP Publishing LTD, 2018)
Interest in all-inorganic halide perovskites has been increasing dramatically due to their high quantum yield, band gap tunability, and ease of fabrication in compositional and geometric diversity. In this study, we ...
Tailoring the properties of spark plasma sintered SiAlON containing graphene nanoplatelets by using different exfoliation and size reduction techniques: Anisotropic electrical properties
(Elsevier Sci LTD, 2018)
Insulating SiAlON ceramics can be machined into complex shapes if the electrical conductivities can be increased with additives. Therefore, the microfluidization technique was used as an alternative to traditional sonication ...
Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718
(Elsevier Science Sa, 2017)
Machining of Inconel 718 is a challenging process because of high hot strength and hardness, high reactivity with the tool materials and low thermal conductivity of Inconel 718 alloy. Although SiAION ceramics in the form ...
Incorporation of the transition metals (Cr and Fe) into beta-SiAlON crystal structure
(Elsevier Sci LTD, 2011)
Outstanding properties for SiAlON ceramics can be obtained by tailoring the microstructure through alpha-SiAlON and beta-SiAlON phase content as well as a type of secondary phases. It is so far well known that while some ...
The mechanism for the colour change of iron chromium black pigments in glazes through transmission electron microscopy techniques
(Elsevier Sci LTD, 2011)
Black iron chromium (Fe-Cr) bearing oxide pigments are generally utilised as effective colourants in a wide variety of applications. However, in the case of their use within ZnO-containing glazes, they yield an undesirable ...
Quantitative X-ray diffraction analysis of reactive infiltrated boron carbide-aluminium composites
(Elsevier Sci LTD, 2003)
Dense (> 98% of theoretical) boron carbide, (B4C)-aluminium (Al) composites were produced between 985 and 1370 degreesC by pressureless melt infiltration of Al alloys into porous B4C compacts under. argon (Ar) atmosphere. ...
Fe-Cr siyah seramik pigment üretiminde ferrokrom kullanımı
(2010)
Bu çalışmada, saf oksitlere göre daha ucuz hammaddeler laıllanarak. porselen karo bünyeleri için siyah Fe-Cr hematit pigmentlerin üretimi ve karalüerizasyonu amaçlanmıştır. Hematit ve ferrokrom ile üretilen pigmentlerin ...
Production of blue willemite based pigments by using ZnO powder produced from metal slags
(Trans Tech Publications LTD, 2004)
In this study, production of pigments by adding different amount of Co and calcination at different temperatures were under-taken. Co-willemite blue pigments were produced by using ZnO powders produced from metal slags. ...
Production of coloured zircon pigments from zircon
(Elsevier Sci LTD, 2007)
Zircon (ZrSiO4) pigments are commonly used in the ceramic industry for glazes due to their high chemical stability and superior resistance to the dissolution during firing in glazes. These pigments are made by calcining a ...