Ara
Toplam kayıt 11, listelenen: 1-10
Thermal shock behaviour of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)
Thermal shock behaviour of alumina-mullite-zircon refractories was investigated by varying zircon content. Thermal shock parameters R and R-st based on the room temperature mechanical measurements were calculated as a ...
The influence of fine alumina particles on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories
(Trans Tech Publications LTD, 2004)
The object of this work is to improve understanding of relationships between microstructure and those mechanical properties likely to affect thermal shock behaviour of slip-cast alumina-mullite refractories. The incorporation ...
The microstructural features of an alumina-mullite-zirconia refractory material corroded by molten glass
(Elsevier Sci LTD, 2003)
An alumina-mullite-zirconia refractory penetrated by a standard soda-lime-silica glass was statically tested at 1370 degreesC for 72 h. Microstructural features and EDAX analysis of the compositions in the corroded region ...
Mechanical properties and thermal shock behaviour of alumina-mullite-zirconia and alumina-mullite refractory materials by slip casting
(Elsevier Sci LTD, 2003)
Strength and modulus values of slip-cast alumina-mullite-zirconia and alumina-mullite refractories have been determined as a function of quench temperature by air and water quenching. The resistance to fracture initiation ...
Effect of the processing on the production of cordierite-mullite composite
(Elsevier Sci LTD, 2010)
In this study, effect of process on the production of cordierite mullite composite was studied. For this reason two different processing methods were used in the production of cordierite mullite composites. In first process, ...
The effect of mullite on the mechanical properties and thermal shock behaviour of alumina-mullite refractory materials
(Elsevier Sci LTD, 2003)
Mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories have been investigated. There was a marked improvement in strength, Young's modulus and fracture toughness values with the addition ...
Mechanical properties of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)
The relationships between mechanical properties and microstructure of alumina-mullite-zircon refractories were investigated by varying zircon content. Various sintering temperatures were used for the slip-cast refractories ...
The corrosion resistance of alumina-mullite-zircon refractories in molten glass
(Trans Tech Publications LTD, 2004)
Corrosion measurements on a set of alumina-mullite-zircon refractories have been carried out using a static crucible test consisting of a "hole in a block". Rates of corrosion of the refractory at 1370 degreesC for 72 h ...
Investigation of parameters affecting formation of mullite from kaolin
(Trans Tech Publications LTD, 2004)
This study aims to improve the understanding of formation of mullite from kaolin at low process temperature using different sintering regimes. The optimum parameters affecting mullite formation from kaolin such as sintering ...
Fundamentals for optimization of binding for high refractory mullite products
(Trans Tech Publications LTD, 2004)
Properties of the binder matrix affect the quality of the refractory. Better qualities are possible if the binding is optimum. Mechanical properties, thermal shock resistance, creep and corrosion behaviour of the mullite ...