Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 286, listelenen: 251-270
-
Tailoring the properties of spark plasma sintered SiAlON containing graphene nanoplatelets by using different exfoliation and size reduction techniques: Anisotropic electrical properties
(Elsevier Sci LTD, 2018)Insulating SiAlON ceramics can be machined into complex shapes if the electrical conductivities can be increased with additives. Therefore, the microfluidization technique was used as an alternative to traditional sonication ... -
Tailoring the properties of spark plasma sintered SiAlON containing graphene nanoplatelets by using different exfoliation and size reduction techniques: Anisotropic mechanical and thermal properties
(Elsevier Sci LTD, 2018)SiAlON ceramics are intensively used in different areas but still there is a need to improve the mechanical and thermal properties as well as ease of machinability and reduce the weight. In this study, the effect of graphene ... -
Tailoring thermal conductivity of silicon/germanium nanowires utilizing core-shell architecture
(Amer Inst Physics, 2016)Low-dimensional nanostructured materials show large variations in their thermal transport properties. In this work, we investigate the influence of the core-shell architecture on nanowire (1D) thermal conductivity and ... -
Tek Eksenli Basınç Altında Bükülme Davranışı Gösteren Kompozit Silindirlerin Tasarımı Ve Optimizasyonu ?
(2013)Bu çalışmanın amacı kompozit silindirlerin baskı yükü altında bükülme performanslarının tahminlenmesinde genetik algoritma, kesik değerli parçacık sürü optimizasyonu ve sürekli değerli parçacık sürü optimizasyonu metodlarının ... -
Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/polyester hybrid nanocomposites produced by 3-roll milling
(Elsevier Science Sa, 2009)This study aims to investigate the tensile mechanical behavior and fracture toughness of vinyl-ester/polyester hybrid nanocomposites containing various types of nanofillers, including multi- and double-walled carbon nanotubes ... -
Texture development in Fe-doped alumina ceramics via templated grain growth and their application to carbon nanotube growth
(Elsevier Sci LTD, 2013)Fe-doped alumina (Fe-Al2O3) materials with a controlled microstructure could be designed for some special uses such as a substrate for carbon nanotube growth. In this study, Fe-doped Al2O3 ceramics with varying degrees of ... -
Textured PMN-PT and PMN-PZT
(Blackwell Publishing, 2008)A promising way to improve the performance of piezoelectric ceramics is grain orientation by templated grain growth. In this work lead-based piezoelectric ceramics Pb(Mg1/3Nb2/3)(0.68)Ti0.32O3 (PMN-32PT) and Pb(Mg1/3Nb2/ ... -
Thermal conductivity engineering of bulk and one-dimensional Si-Ge nanoarchitectures
(Taylor & Francis LTD, 2017)Various theoretical and experimental methods are utilized to investigate the thermal conductivity of nanostructured materials; this is a critical parameter to increase performance of thermoelectric devices. Among these ... -
Thermal Conductivity Suppression in Nanostructured Silicon and Germanium Nanowires
(Springer, 2016)The inherent low lattice thermal conductivity (TC) of semiconductor nanowires (s-NW) due to one-dimensional phonon confinement might provide a solution for the long-lasting figure-of-merit problem for highly efficient ... -
Thermal Curing Behavior of MWCNT Modified Vinyl Ester-Polyester Resin Suspensions Prepared with 3-Roll Milling Technique
(Wiley, 2009)This study aims to investigate the curing behavior of a vinyl ester-polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT-NH2). For this ... -
Thermal properties of pressureless melt infiltrated AlN-Si-Al composites
(Elsevier Science BV, 2013)Thermal properties of AlN-Si-Al composites produced by pressureless melt infiltration of Al/Al alloys into porous alpha-Si3N4 preforms were investigated in a temperature range of 50-300 degrees C. SEM and TEM investigations ... -
Thermal shock behaviour of magnesia-spinel composites
(Elsevier Sci LTD, 2004)The incorporation of up to 30% of spinel powder of median particle sizes 3, 11 and 22 mum into dense magnesia gives improved resistance to thermal shock as indicated both by the R''' thermal shock resistance parameters ... -
Thermal transport properties of MoS2 and MoSe2 monolayers
(IOP Publishing LTD, 2016)The isolation of single- to few-layer transition metal dichalcogenides opens new directions in the application of two-dimensional materials to nanoelectronics. The characterization of thermal transport in these new ... -
Thermochemical conversion of poultry chicken feather fibers of different colors into microporous fibers
(Elsevier Science BV, 2015)Thermochemical behavior of the poultry chicken feather fibers (PCFFs) of different colors was studied to gain an insight into their structural changes that were considered when converting them into fibers through pyrolysis ... -
The third order nonlinear optical characteristics of amorphous vanadium oxide thin film
(Springer, 2011)We studied the nonlinear absorptive characteristics (saturation intensity threshold and effective nonlinear absorption coefficients) and nonlinear refraction in a 50-nm-thick VO (x) thin amorphous film prepared by pulsed ... -
Towards atomic scale engineering of rare-earth-doped SiAlON ceramics through aberration-corrected scanning transmission electron microscopy
(Pergamon-Elsevier Science LTD, 2011)Direct visualization of rare earths in alpha- and beta-SiAlON unit-cells is performed through Z-contrast imaging technique in an aberration-corrected scanning transmission electron microscope. The preferential occupation ... -
Türkiye'de Üretilen Barit Cevherinin Baryum İçeren Pigmentlerin Üretiminde Değerlendirilmesi
(2015)Barit ve baryum içeren kimyasallar, sondaj çamuru, dolgu malzemesi, pigment, kağıt beyazlatma ve cam ilavesi olarak kimyasal ve üretim endüstrilerinde geniş uygulama alanlarında kullanılan önemli malzemelerdir. Bu çalışma, ... -
Ultrasonic characterization of defective porcelain tiles
(Soc Espanola Ceramica Vidrio, 2012)The aim of this work is the optimization of ultrasonic methods in the non-destructive testing of sintered porcelain tiles containing defects. For this reason, a silicon nitride ball, carbon black and PMMA (Polymethylmethacrylate) ... -
The usage of magnesite production wastes in ceramic tile bodies
(Korean Assoc Crystal Growth, Inc, 2014)In this study the possibilty of using magnesite wastes, which were consist of during the production of magnesite from Tutluca village (southwest of Eskisehir/Turkey) ore bed to make ceramic tile bodies were explored. The ... -
The usage of newly developed glass fibre in cement structure and their characterization
(Elsevier Sci LTD, 2018)In this work, recently developed Zrnl glass fibres belonging to the SrO-Mn2O3-Fe2O3-MgO-ZrO2-SiO2 (SMFMZS) system have been used as reinforcing materials in cement. The highest (2.610 N/mm(2)) compressive strength value ...