Ara
Toplam kayıt 128, listelenen: 1-10
Thermal shock behaviour of alumina-mullite-zircon refractories
(Trans Tech Publications LTD, 2004)
Thermal shock behaviour of alumina-mullite-zircon refractories was investigated by varying zircon content. Thermal shock parameters R and R-st based on the room temperature mechanical measurements were calculated as a ...
The influence of fine alumina particles on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories
(Trans Tech Publications LTD, 2004)
The object of this work is to improve understanding of relationships between microstructure and those mechanical properties likely to affect thermal shock behaviour of slip-cast alumina-mullite refractories. The incorporation ...
The characterization and the utilization of the waste clays from gümüşköy silver mine in brick industry
(2004)
In this study, the main characteristics and technological properties of the waste clays from silver deposit located in the northern part of Kutahya (mid-south of Turkey) are presented. The clays were characterized by X-ray ...
The utilization of waste clay from coal basin in the wall tile body formulation
(Trans Tech Publications LTD, 2004)
In this study, the waste clays extracted from coal basin were used as a wall tile ingredient instead of the clay materials of the standardized biscuit formulation of the wall tile. XRD data show that waste clay contains ...
Optimization of alpha-sialon microstructure by heat treatment
(Trans Tech Publications LTD, 2008)
Nd-doped alpha-SiAlON starting composition (Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38)) was prepared by gas pressure sintering at 1825 degrees C for 3 hrs. In order to explore the effect of post heat treatment on the developments ...
Effects of Alumina and White Fused Alumina Addition on Transparent Wall and Floor Tile Glazes
(Polish Acad Sciences Inst Physics, 2015)
In tile manufacturing, alpha-Al2O3 is the main type of alumina used in ceramic body and glaze formulations. This raw material acts as an pacifier in porcelain tile bodies and as a matting agent in glazes. White fused alumina ...
Role of alpha-SiAlON nuclei addition on the rod-like y-sm alpha-SiAlON formations
(Trans Tech Publications LTD, 2007)
In this study, effect of seed addition on the microstructural development of Y-Sm alpha-SiAION system has been investigated. Besides using pre-produced rod-like alpha-SiAION seeds, growth in the glassy phase and harvested ...
Effects of the red mud based pigment addition on the physical and micro-structural properties of porcelain tiles
(Trans Tech Publications LTD, 2004)
In the production of conventional porcelain tiles colouring agents, being either in the form of pure oxides or pigments, are commonly and widely used at considerably high amounts to increase the attraction impact of final ...
Applications of calcium phosphate based antibacterial ceramics on sanitary and tile wares
(Trans Tech Publications LTD, 2004)
In this study, metal cation consisting calcium phosphate based antibacterial ceramic powders were synthesized with wet chemical technique. The developed antibacterial powder was added to the glaze composition of the ceramic ...
Vibration aided vacuum infusion of bnns modified carbon Fabric/Epoxy composites
(International Committee on Composite Materials, 2017)
Two-dimensional (2D) materials have aroused remarkable attention since the successful separation of graphene, atomic layers of carbon, has demonstrated novel electronic properties. Boron nitride (BN) is a structural analog ...