Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorBuyuk, B.
dc.contributor.authorTuğrul, A. Beril
dc.contributor.authorAddemir, A. Okan
dc.contributor.authorAy, Nuran
dc.date.accessioned2019-10-21T21:12:41Z
dc.date.available2019-10-21T21:12:41Z
dc.date.issued2014
dc.identifier.issn0587-4246
dc.identifier.issn1898-794X
dc.identifier.urihttps://dx.doi.org/10.12693/APhysPolA.125.420
dc.identifier.urihttps://hdl.handle.net/11421/21431
dc.description3rd International Congress on Advances in Applied Physics and Materials Science -- APR 24-28, 2013 -- Antalya, TURKEYen_US
dc.descriptionWOS: 000339825400082en_US
dc.description.abstractHexagonal boron nitride (h-BN) and hexagonal boron nitride-titanium diboride (h-BN-TiB2) composites are advanced materials for high-tech applications. They were investigated against gamma radioisotope sources Cs-137 and Co-60 which have gamma peaks 0.662 MeV for Cs-137, and 1.17 and 1.33 MeV for Co-60. Materials have been produced at 1800 C temperature in argon atmosphere without pressure during 2 h time. Linear and mass attenuation coefficients were calculated for the materials. Gamma transmission technique was used in the experiments. The experimental investigated mass attenuation coefficients of the materials for Cs-137 and Co-60 gamma radioisotope sources were compared with XCOM computer code. For h-BN-TiB2 composites the ratio of TiB2 in the composites is 55% by weight. So gamma attenuation effects of adding TiB2 to h-BN were discussed. It could be said that adding TiB2 to h-BN increases the linear gamma attenuation of the samples.en_US
dc.description.sponsorshipDoga Nanobiotech Inc, Mega Technol Serv Incen_US
dc.language.isoengen_US
dc.publisherPolish Acad Sciences Inst Physicsen_US
dc.relation.isversionof10.12693/APhysPolA.125.420en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleGamma Attenuation Behavior of h-BN and h-BN-TiB2 Compositesen_US
dc.typeconferenceObjecten_US
dc.relation.journalActa Physica Polonica Aen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume125en_US
dc.identifier.issue2en_US
dc.identifier.startpage420en_US
dc.identifier.endpage422en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorAy, Nuran


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster