Ara
Toplam kayıt 27, listelenen: 1-10
The effect of carbide particle additives on rheology of shear thickening fluids
(Korean Soc Rheology, 2016)
In this paper, shear thickening fluids (STFs) including silicon carbide particles are presented. We fabricated a kind of STF based on nanosize fumed silica suspended in a liquid medium, polyethylene glycol, at a constant ...
The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics
(Taylor & Francis Inc, 2017)
Applications of shear thickening fluids (STFs) with ballistic fabrics improve the protection performance of body protective systems. This article presents an innovative view of STF-impregnated ballistic fabrics by integrating ...
Değişken İlerleme Hızları Kullanılarak Tornalama İşleminde Talaş Kırma Uygulaması ile İlgili Yeni Bir Yaklaşım
(2017)
Talaşlı imalat işlemlerinde, özellikle tornalama operasyonunda, işlem verimini ve ürün kalitesini belirleyen pek çok unsur mevcuttur. Kesme kuvvetleri, kesme bölgesi sıcaklığı, takım aşınması, üretilen talaş profili gibi ...
Investigation of impact behavior of TIG welded inconel 718 at aircraft engine operating temperatures
(Trans Tech Publications Ltd, 2017)
In this work, Charpy notch pendulum impact test was performed on non-welded and TIG (Tungsten Inert Gas) welded Inconel 718 specimens at three different temperatures as 20°C, 500°C and 700°C. After the completion of tests, ...
Shear thickening fluids in protective applications: A review
(Pergamon-Elsevier Science LTD, 2017)
A thorough and critical review on Shear Thickening Fluids (STFs) is presented based on a literature survey. The rheological properties of STFs are discussed considering many factors affecting shear thickening behavior and ...
A risk analysis model for mining accidents using a fuzzy approach based on fault tree analysis
(Emerald Group Publishing LTD, 2018)
Purpose Risk analysis is a critical investigation field for many sectors and organizations to maintain the information management reliable. Since mining is one of the riskiest sectors for both workers and management, ...
Systematical Review on the Numerical Simulations of Laser Powder Bed Additive Manufacturing
(Yildiz Technical University, 2018)
Additive manufacturing technologies, depending on melting of metal powder particles layer upon layer for building 3D functional objects, have widened their application area within biomedical, automotive, aerospace and ...
Springback Behavior of AA6082T6 Tubes in Three-point Bending Operation
(Elsevier Science BV, 2017)
Springback is an inevitable phenomenon in bending operations. For the geometrical accuracy in manufacturing, springback should be predicted and a required compensation should be applied to the operation. The numerical ...
Dynamic Properties of Clean Sand Modified with Granulated Rubber
(Hindawi LTD, 2018)
Waste automobile tires are used as additives or replacements instead of traditional materials in civil engineering works. In geotechnical engineering, tires are shredded to certain sizes and mixed with soil, especially ...
The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel
(Korean Soc Mechanical Engineers, 2017)
Cryogenic treatment is a supplementary heat treatment usually applied after quenching. Its effects are permanent and this process affects the entire section. There have been many studies related to cryogenic treatment, ...