Ara
Toplam kayıt 18, listelenen: 1-10
The effect of carbide particle additives on rheology of shear thickening fluids
(Korean Soc Rheology, 2016)
In this paper, shear thickening fluids (STFs) including silicon carbide particles are presented. We fabricated a kind of STF based on nanosize fumed silica suspended in a liquid medium, polyethylene glycol, at a constant ...
The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics
(Taylor & Francis Inc, 2017)
Applications of shear thickening fluids (STFs) with ballistic fabrics improve the protection performance of body protective systems. This article presents an innovative view of STF-impregnated ballistic fabrics by integrating ...
Değişken İlerleme Hızları Kullanılarak Tornalama İşleminde Talaş Kırma Uygulaması ile İlgili Yeni Bir Yaklaşım
(2017)
Talaşlı imalat işlemlerinde, özellikle tornalama operasyonunda, işlem verimini ve ürün kalitesini belirleyen pek çok unsur mevcuttur. Kesme kuvvetleri, kesme bölgesi sıcaklığı, takım aşınması, üretilen talaş profili gibi ...
Dynamic Properties of Clean Sand Modified with Granulated Rubber
(Hindawi LTD, 2018)
Waste automobile tires are used as additives or replacements instead of traditional materials in civil engineering works. In geotechnical engineering, tires are shredded to certain sizes and mixed with soil, especially ...
The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel
(Korean Soc Mechanical Engineers, 2017)
Cryogenic treatment is a supplementary heat treatment usually applied after quenching. Its effects are permanent and this process affects the entire section. There have been many studies related to cryogenic treatment, ...
The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives
(Elsevier Sci LTD, 2017)
Shear thickening fluid (STF) treated high performance fabrics have attracted much attention in the applications of body protection. In order to improve the contribution of STF treatments, we designed multiphase STFs and ...
Effect of heat treatment on the bending behavior of aluminum alloy tubes
(Korean Soc Mechanical Engineers, 2017)
Quasistatic experiments and numerical simulations were performed to investigate the three-point bending behavior of different temper AA6082 tubes in this study. The effect of heat treatment on the samples was investigated ...
The rheology of shear thickening fluids with various ceramic particle additives
(Elsevier Sci LTD, 2016)
In this paper, shear thickening fluids (STFs) and three different types of additive particles such as silicon carbide, aluminum oxide and boron carbide are presented. STFs were fabricated based on nanosize fumed silica ...
Effect of working fluid on the performance of the duplex Stirling refrigerator
(Elsevier Sci LTD, 2018)
Duplex Stirling refrigerator is one of the best alternative systems for providing green and clean energy solutions. It consists of Stirling refrigerator and Stirling heat engine in a back to back configuration. The main ...
Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts
(Elsevier Sci LTD, 2017)
This paper examines the load bearing capacity of medium-length steel cylindrical shells with a circular cutout under the action of axial compression. Numerical simulations were performed for a radius-to-thickness ratio ...