Yazar "Seyhan, Abdullah Tuğrul" için listeleme
-
Boron nitride nanosheet (BNNS) filled pmma nanofibers as filler for composites
Seyhan, Abdullah Tuğrul (International Committee on Composite Materials, 2017)Polymethylmethacrylate/Boron nitride nanosheets (PMMA/BNNSs) nanofibers were produced by conducting electrospinning. Various different processing parameters, including applied voltage, flow rate, molecular weight and ... -
Characterizaton of vinlyester resin modified with BNNS filled PMMA electrospun nanofibers
Gürcan, Ş.; Seyhan, Abdullah Tuğrul (European Conference on Composite Materials, ECCM, 2016)Polymethylmethacrylate/Boron nitride nanosheets (PMMA/BNNSs) nanofibers were produced by conducting electrospinning. Various different processing parameters, including applied voltage, flow rate, molecular weight and ... -
Creep and recovery behaviors of chemically induced grafted low density polyethylene films containing silanized hexagonal boron nitride nanosheets
Seyhan, Abdullah Tuğrul; Tuna, Ayşegül; Durukan, Oya; Göncü, Yapıncak; Turan, Servet; Ay, Nuran (Amer Scientific Publishers, 2018)Few layers boron nitride nanosheets (BNNSs) were derived from precursors of specially synthesized micro-sized hexagonal boron nitrides (h-BNs) of large flakes through microfluidization. They were then considered promising ... -
Cure kinetics of vapor grown carbon nanofiber (VGCNF) modified epoxy resin suspensions and fracture toughness of their resulting nanocomposites
Seyhan, Abdullah Tuğrul; Sun, Z.; Deitzel, J.; Tanoğlu, M.; Heider, D. (Elsevier Science Sa, 2009)In this study, the cure kinetics of Cycom 977-20. an aerospace grade toughened epoxy resin, and its suspensions containing various amounts (1, 3 and 5 wt.%) of vapor grown carbon nanofibers (VGCNFs) with and without chemical ... -
Electric field effects on CNTs/vinyl ester suspensions and the resulting electrical and thermal composite properties
Yurdakul, Hilmi; Seyhan, Abdullah Tuğrul; Turan, Servet; Tanoğlu, Metin; Bauhofer, Wolfgang; Schulte, Karl (Elsevier Sci LTD, 2010)In this study, electrical conductivity of a vinyl ester based composite containing low content (0.05, 0.1 and 0.3 wt.%) of double and multi-walled carbon nanotubes with and without amine functional groups (DWCNTs, MWCNTs, ... -
Evaluating Addition of a Membrane Layer in Vacuum Infusion Processing of Fiber Reinforced Epoxy Composites in Terms of Flexural Properties and Void Content
Seyhan, Abdullah Tuğrul (2017)The effect of addition of a membrane layer in vacuum infusion process was investigated with emphasis being placed on the flexural properties and void content of the resulting composites. E-glass fiber and epoxy were, ... -
Evaluating vibration assisted vacuum infusion processing of hexagonal boron nitride sheet modified carbon fabric/epoxy composites in terms of interlaminar shear strength and void content
Meier, Reinhold; Kahraman, İlhan; Seyhan, Abdullah Tuğrul; Zaremba, Swen; Drechsler, Klaus (Elsevier Sci LTD, 2016)The results of an investigation of the effect of voids on the interlaminar shear strength (ILSS) of carbon fabric/epoxy composites consolidated from fabric preforms containing hexagonal boron nitride sheets (h-BNSs) were ... -
Microfluidization, time-effective and solvent free processing of nanoparticle containing thermosetting matrix resin suspensions for producing composites with enhanced thermal properties
Durukan, Oya; Kahraman, İlhan; Parlevliet, Patricia; Geistbeck, Matthias; Seyhan, Abdullah Tuğrul (Pergamon-Elsevier Science LTD, 2016)Dispersion of low content (0.1 wt.%) of multi walled carbon nanotubes (MWCNTs) in an epoxy resin through microfluidization was brought under spotlight as a case study. For the sake of performance comparison, epoxy resin ... -
Microstructural characterization of corn starch-based porous thermoplastic composites filled with multiwalled carbon nanotubes
Yurdakul, Hilmi; Durukan, Oya; Seyhan, Abdullah Tuğrul; Çelebi, Hande; Öksüzoğlu, Mustafa; Turan, Servet (Wiley, 2013)Microstructural characterization of corn starch-based porous thermoplastic (TPS) composites containing various contents (0.1, 0.5, and 1 wt %) of multiwalled carbon nanotubes (MWCNTs) was performed. Corn starch was plasticized ... -
Nanoscopic characterization of two-dimensional (2D) boron nitride nanosheets (BNNSs) produced by microfluidization
Yurdakul, Hilmi; Göncü, Yapmcak; Durukan, Oya; Akay, Atakan; Seyhan, Abdullah Tuğrul; Ay, Nuran; Turan, Servet (Elsevier Sci LTD, 2012)A microfluidizer high pressure fluid processor is successfully conducted for the first time to exfoliate few layer two dimensional (2D) boron nitride nanosheets (BNNSs) from micro-sized hexagonal boron nitride (h-BN) ... -
Orange Peel-Derived Pectin Jelly and Corn Starch-Based Biocomposite Film with Layered Silicates
Günkaya, Zerrin; Banar, Müfide; Seyhan, Abdullah Tuğrul (Wiley-Blackwell, 2014)Orange peel-derived pectin jelly/corn starch-based biocomposite films with and without layered silicates (LSs) were prepared using melt extrusion followed by film die casting. To enhance interfacial compatibility, corn ... -
Silanization of boron nitride nanosheets (BNNSs) through microfluidization and their use for producing thermally conductive and electrically insulating polymer nanocomposites
Seyhan, Abdullah Tuğrul; Göncü, Yapıncak; Durukan, Oya; Akay, Atakan; Ay, Nuran (Academic Press Inc Elsevier Science, 2017)Chemical exfoliation of boron nitride nanosheets (BNNSs) from large flakes of specially synthesized micro-sized hexagonal boron nitride (h-BN) ceramics was carried out through microfluidization. The surface of BNNSs obtained ... -
A Statistical Study of Fatigue Life Prediction of Fibre Reinforced Polymer Composites
Seyhan, Abdullah Tuğrul (Ismithers, 2011)In this study, the tension-tension fatigue response of bidirectional woven E-glass fibre reinforced unsaturated polyester composites was experimentally determined. The composite parts were produced via continuous laminating ... -
Tailoring the properties of spark plasma sintered SiAlON containing graphene nanoplatelets by using different exfoliation and size reduction techniques: Anisotropic electrical properties
Başkut, Sinem; Çınar, Alper; Seyhan, Abdullah Tuğrul; Turan, Servet (Elsevier Sci LTD, 2018)Insulating SiAlON ceramics can be machined into complex shapes if the electrical conductivities can be increased with additives. Therefore, the microfluidization technique was used as an alternative to traditional sonication ... -
Tailoring the properties of spark plasma sintered SiAlON containing graphene nanoplatelets by using different exfoliation and size reduction techniques: Anisotropic mechanical and thermal properties
Çınar, Alper; Başkut, Sinem; Seyhan, Abdullah Tuğrul; Turan, Servet (Elsevier Sci LTD, 2018)SiAlON ceramics are intensively used in different areas but still there is a need to improve the mechanical and thermal properties as well as ease of machinability and reduce the weight. In this study, the effect of graphene ... -
Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/polyester hybrid nanocomposites produced by 3-roll milling
Seyhan, Abdullah Tuğrul; Tanoğlu, Metin; Schulte, Karl (Elsevier Science Sa, 2009)This study aims to investigate the tensile mechanical behavior and fracture toughness of vinyl-ester/polyester hybrid nanocomposites containing various types of nanofillers, including multi- and double-walled carbon nanotubes ... -
Thermal Curing Behavior of MWCNT Modified Vinyl Ester-Polyester Resin Suspensions Prepared with 3-Roll Milling Technique
Seyhan, Abdullah Tuğrul; De la Vega, Alejandra; Tanoğlu, M.; Schulte, K. (Wiley, 2009)This study aims to investigate the curing behavior of a vinyl ester-polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT-NH2). For this ... -
Thermochemical conversion of poultry chicken feather fibers of different colors into microporous fibers
Tuna, Ayşegül; Okumuş, Yiğitalp; Çelebi, Hande; Seyhan, Abdullah Tuğrul (Elsevier Science BV, 2015)Thermochemical behavior of the poultry chicken feather fibers (PCFFs) of different colors was studied to gain an insight into their structural changes that were considered when converting them into fibers through pyrolysis ... -
Vibration aided vacuum infusion of bnns modified carbon Fabric/Epoxy composites
Seyhan, Abdullah Tuğrul; Meier, R.; Zaremba, S.; Drechesler, K. (International Committee on Composite Materials, 2017)Two-dimensional (2D) materials have aroused remarkable attention since the successful separation of graphene, atomic layers of carbon, has demonstrated novel electronic properties. Boron nitride (BN) is a structural analog ...
