Yayıncı "Amer Ceramic Soc" için listeleme
Toplam kayıt 17, listelenen: 1-17
-
alpha/beta SiAlON BASED COMPOSITES INCORPORATED WITH MoSi2 FOR ELECTRICAL APPLICATIONS
(Amer Ceramic Soc, 2010)Electrically conductive alpha-beta SiAlON composites containing 30 vol. % MoSi2 was prepared by gas pressure sintering (GPS). The effect of sintering atmosphere on phase formation, grain growth, mechanical and electrical ... -
Capacitor-discharge joining of oxide ceramics
(Amer Ceramic Soc, 1999)A capacitor-discharge joining technique has been used to fabricate alumina-metal-alumina and zirconia-metal-zirconia joints using thin foils of aluminum, titanium, or amorphous AlxNiyYz alloys as interlayers. The technique ... -
Effect of cobalt oxide and copper oxide additions to zinc-containing soft porcelain glazes
(Amer Ceramic Soc, 2001)… -
Effect of electrolytes on sanitaryware slip
(Amer Ceramic Soc, 1999)Slip viscosity is used widely in controlling ceramic casting slip. The viscosity of slip changes with the amount and type of electrolyte. -
Ferrochromium Fly-Ash Used as a Pigment in Ceramic Glaze
(Amer Ceramic Soc, 1994)Ferrochromium fly ash, usually considered as waste, can be used to produce a range of glaze colors. -
Fluoride emission factors for ceramic sanitaryware kilns
(Amer Ceramic Soc, 2003)Fluoride emissions from sanitaryware kilns exhibited significant and systematic sensitivity only to fuel type. -
Microstructural characterization of reactively sintered mullites
(Amer Ceramic Soc, 2000)Mullite ceramics have been produced by reaction sintering of powders prepared using pseudoboehmite-colloidal silica and aluminum sulfate-colloidal silica mixtures. The microstructural development of these mullites was ... -
Preparation of multiple-cation alpha-SiAlON ceramics containing lanthanum
(Amer Ceramic Soc, 1999)Until recently, it was accepted that Ce3+ cations, with an ionic radius (r) of 1.03 Angstrom, were too large to form an alpha-SiAlON structure. However, more-recent studies have shown that cerium cations can be incorporated ... -
Use of perlite in wall tile production
(Amer Ceramic Soc, 1999)Raw perlite was added to monoporous tile bodies in different proportions. Their mechanical, physical and thermal characteristics were compared to ones having no perlite. Adding perlite to wall tile bodies offers both weight ...