Ara
Toplam kayıt 15, listelenen: 1-10
Utilisation of Fly Ash in Geobricks Produced By Pressure Forming Process
(Novpress Sro, 2011)
In this experimental investigation, various geobricks were produced from F and C-type fly ash. A combination of sodium hydroxide (NaOH) and sodium silicate solution was used as alkaline activator. The fly ash based geobricks ...
Re-use of muds from glazing and pressing lines of ceramic tile industry in wall and floor type formulations
(Minerals, Metals & Materials Soc, 2006)
Turkey is the fifth biggest ceramic tile exporter in the world. Considering the expectation that the Turkish tile sector continues to expand, further studies both on the improvement and the development of tile formulations ...
The use of fired roof tile and brick wastes in stoneware bodies as alternative raw materials
(2008)
In this study, the utilization capability of the solid wastes taken from a commercial roof tile and brick factory in Eskisehir of Turkiye has been investigated in the production of stoneware bodies which can be formed by ...
Effect of Particle Size Distribution on the Sintering Behaviour of Fly Ash, Red Mud and Fly Ash-Red Mud Mixture
(Springer International Publishing Ag, 2018)
In this study, the characterization and microstructure observation of the sintering behaviour of F (from Seyitomer Thermal Power Plant) and C (from Soma Thermal Power Plant) types fly ashes, red mud and red mud-fly ash ...
Effect of different nucleation temperatures on the microstructural development of alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)
alpha-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ...
Investigation of the influence of initial powder size on the optical properties of Dy-alpha-SiAlON ceramics fabricated by gas pressure sintering
(Elsevier Sci LTD, 2017)
Translucent Dy3+ doped alpha-SiAlON ceramics were successfully fabricated by the gas pressure sintering (GPS) method. The efficacy of this sintering technique also the affects initial particle size on densification, final ...
Mg+2 and Ce+3 doped ?-SiAlON ceramics
(2004)
In the present work, stabilization of MgO and CeO2 in ?-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830°C for 1 hour in gas pressure sintering furnace ...
Mechanical and microstructural properties of heated and polluted kaolinite and bentonite
(Trans Tech Publications LTD, 2004)
High temperatures and pollution due to the storage of nuclear wastes in deep soil influence the mechanical properties and microstructure of kaolinite and bentonite. In this study, 0.5 N CaCl2 and 2000 ppm ZnCl2 solutions ...
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)
In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ...
Investigation of borax waste behaviour in tile production
(Elsevier Sci LTD, 2007)
Although there are various studies published in the relevant literature on the use of borates in tile production, borax waste has been mainly used in place of feldspar and the results showed that borate migration to the ...