dc.contributor.author | Bereket, G | |
dc.contributor.author | Hür, Evrim | |
dc.contributor.author | Şahin, Y | |
dc.date.accessioned | 2019-10-20T09:30:50Z | |
dc.date.available | 2019-10-20T09:30:50Z | |
dc.date.issued | 2005 | |
dc.identifier.issn | 0300-9440 | |
dc.identifier.uri | https://dx.doi.org/10.1016/j.porgcoat.2005.06.002 | |
dc.identifier.uri | https://hdl.handle.net/11421/17482 | |
dc.description | WOS: 000231625100009 | en_US |
dc.description.abstract | Stable and adherent polymer films of polyaniline and of poly(2-anisidine) were grown on 304-stainless steel by cyclic voltammetry in tetrabutylammonium perchlorate/acetonitrile solution containing perchloric acid. Conducting poly(aniline-co-2-anisidine) was also formed on 304-stainless steel in same condition, but the film was unstable and peeled off after 3 h when it is immersed in aggressive solution. The structure and properties of these polymer films were characterized by FTIR and UV-vis spectroscopy and by electrochemical methods. The anti-corrosion behavior of polyaniline, poly(2-anisidine), and poly(aniline-co-2-anisidine) coated electrodes were investigated in 0.5 M hydrochloric acid solutions by potentiodynamic polarization technique, open circuit potential-time curves and electrochemical impedance spectroscopy. Poly(2-anisidine) film shows protection against corrosion 304-stainless steel in 0.5 M HCI by passivating steel substrate in similar manner as has been observed for polyaniline. But anti-corrosion behavior was slightly poorer than that of polyaniline | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier Science Sa | en_US |
dc.relation.isversionof | 10.1016/j.porgcoat.2005.06.002 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Conducting Polymer | en_US |
dc.subject | Polyaniline | en_US |
dc.subject | Polyanisidine | en_US |
dc.subject | Corrosion | en_US |
dc.subject | Steel | en_US |
dc.subject | Electropolymerization | en_US |
dc.title | Electrochemical synthesis and anti-corrosive properties of polyaniline, poly(2-anisidine), and poly(aniline-co-2-anisidine) films on stainless steel | en_US |
dc.type | review | en_US |
dc.relation.journal | Progress in Organic Coatings | en_US |
dc.contributor.department | Anadolu Üniversitesi, Fen Fakültesi, Fizik Bölümü | en_US |
dc.identifier.volume | 54 | en_US |
dc.identifier.issue | 1 | en_US |
dc.identifier.startpage | 63 | en_US |
dc.identifier.endpage | 72 | en_US |
dc.relation.publicationcategory | Diğer | en_US |