Başlık için Porsuk Meslek Yüksekokulu listeleme
Toplam kayıt 112, listelenen: 16-35
-
Calibration/validation of satellite derived snow products with in situ data over the mountainous eastern part of Turkey
(2007)This paper presents the critical issues for the comparison of the parameters that optical remote sensing can deliver (snow-covered area and albedo as MODIS products) with snow survey and lately established automated weather ... -
Cam ve seramik sanayiinde kullanılan fosfor esaslı malzemeler
(1999)Fosforlar rnor ötesi ışınlara tutulduklarında, mavi, yeşil, kırmızı renklerde ışıldama özelliğine sahip malzemelerdir. Sağladıkları fosfor etkisi araştırmacıları ilginç malzemeleri geliştirmeye yöneltmektedir. Bu yazıda ... -
Cartoons on occupational health and safety: Semiotic analysis of workers
(Association of Researchers in Construction Management, 2014)Construction industry is at the top rankings in developed and developing countries in terms of occupational deaths and injuries. This shows that legal regulations themselves could not decrease occupational accidents. In ... -
Characterization of lightweight ferrocement panels containing expanded perlite-based mortar
(Elsevier Sci LTD, 2015)In this study, the deflection and cracking of lightweight ferrocement panels (LFPs) containing expanded perlite based mortar (EPBM) was investigated. For this purpose, twelve LFPs with one or two layers of wire mesh were ... -
Combining pedotransfer functions and scaling for describing the soil hydraulic characteristics of the Kurukavak basin, Turkey
(International Multidisciplinary Scientific Geoconference, 2017)Hydrological process modeling is used to predict the contribution from rainfall-runoff, infiltration, groundwater recharge and evaporation. For this, information related to the interception and movement of water within the ... -
Confusion And/Or Empowerment: the Impact of Online Product Reviews and Recommendations on Consumer Decision Making
(Euromed Management, 2009)… -
Construction professionals' perspectives on cross-cultural training for international construction projects
(2010)Cross-cultural training has long been recognized as an effective method to facilitate cross-cultural interaction. Many global organizations provide cross-cultural training to their expatriates to increase productivity in ... -
Contact angle measurements on lignite surface
(2010)Froth flotation has been widely used for cleaning and desulfurisation of coals for many decades all over the world. There is a close relationship between floatability of minerals and contact angle. Therefore surface ... -
Conversion of coal-fired bottom ash to fuel and construction materials
(Taylor & Francis LTD, 2017)In this study, solid wastes taken from Seyitomer coal-fired power plant bottom ashes were subjected to experimental research to obtain a carbon-rich fraction. The possible recycling opportunities of remaining inorganic ... -
Conversion of CruTS 3.23 data and evaluation of precipitation and temperature variables in a local scale
(EDP Sciences, 2017)The precipitation and temperature data obtained from the last version 3.23 of Climate Research Unit Time Series (CruTS) data are evaluated in a local scale. The data obtained for the period 1901-2014 consists of ten climate ... -
Copyrolysis of seyitomer-lignite and safflower seed: Influence of the blending ratio and pyrolysis temperature on product yields and oil characterization
(American Chemical Society, 2007)Pyrolytic behaviors of biomass/coal mixtures were investigated under a heating rate of 7 degrees C min(-1), over a range of pyrolysis temperatures between 400 and 700 degrees C, and the blending ratio of coal in mixtures ... -
Cyclic Oxidation Behaviour of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Elements
(Trans Tech Publications LTD, 2011)Pest oxidation phenomena is the major drawback of MoSi2 for the applications of this material over gas turbine elements. Therefore, addition of Si3N4 does not only eliminate the structural disintegration behaviour which ... -
Damage assessment and mortar identification in Beylerbeyi palace
(2010)The historical building stock and seismic risk of Anatolia draws considerable attention of the engineers for studying the construction techniques and the earthquake performance of these structures. This study is dealing ... -
Deformation induced dynamic loading for different soil types
(Civil-Comp Press, 2013)Earthquakes can cause different deformations for different soil types and different earthquake characteristics. Deformations caused by earthquakes can be given as follows: surface rupture, regional subsidence, slope ... -
Desulphurization of lignites by slow, fast, and flash pyrolysis and high intensity dry magnetic separation
(Taylor & Francis Inc, 2007)Slow, fast and flash pyrolysis followed by high intensity dry magnetic ( HIDM) separation experiments were conducted to obtain improved solid fuels. Pyrolysis experiments were performed in three different apparatus, and ... -
Determinants of User Acceptance of Digital Libraries
(2013)Bu çalışma, Parçalara Bölünmüş Planlı Davranış Teorisini kullanarak öğretim üyelerinin dijital kütüphane hizmetlerini benimseme niyetlerini belirlemeyi amaçlamaktadır. 426 katılımcıdan toplanan verinin analizi için yapısal ... -
Determination of synergetic effect in co-pyrolysis of lignite and waste tyre
(Elsevier Sci LTD, 2015)An attempt was made to investigate potential synergistic activities between waste tyre and lignite during co-pyrolysis. The parameters such as blending ratios of waste tyre and lignite, final pyrolysis temperature, heating ... -
Dinamik Yükleme Şartlarında Kum/Lastik Karışımlarının Rijitlik ve Sönüm Özelliklerinin İncelenmesi
(2014)Atık lastik kullanımı inşaat mühendisliğinde son zamanlarda yaygınlaşmıştır. Geoteknik mühendisliği açısından atık lastikler genellikle dolgu ve diğer toprak yapı projelerinde kullanılmaktadır. Bu çalışmada, kum/lastik ... -
E-business transformation stages for construction companies
(2007)The business world is continuously changing due to the advances and developments in technology. Innovations in technology change all the industries and the way of performing business activities. E-Business (E-b) has created ... -
Effect of compaction method on mechanical behavior of graded aggregate base materials
(2012)Previous studies indicated that the properties of aggregates and their compaction process are the most important factors in the design of granular highway base layers. It was argued that the conventional compaction method ...