Kategori "Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı" Porsuk Meslek Yüksekokulu İçin Listeleme
Toplam kayıt 40, listelenen: 1-20
-
An ambiguity function aided target density function for radar imaging
(Natl Inst Optoelectronics, 2015)This paper investigates a new approach to target density functions for active sensor imaging. The data obtained from a phased array radar system is processed by the newly developed technique. In order to reconstruct the ... -
Assessing the tensile capacity of cold-formed steel connections using self-drilling screws and adhesive materials
(Insight Society, 2018)This paper presents a review of the proposed design for assessing the tensile capacity of a simply truss framing system of cold-formed steel. A series of connection tests were made to investigate the capacity of connections ... -
Beneficiation of graphite fines from moulding factory wastes
(SAGE Publications LTD, 2005)As the costs of waste disposal increase, more attention is being placed upon the re-use and recycling of valuable minerals contained within the waste streams. In this article, the waste streams from a moulding factory were ... -
Characterization of lightweight ferrocement panels containing expanded perlite-based mortar
(Elsevier Sci LTD, 2015)In this study, the deflection and cracking of lightweight ferrocement panels (LFPs) containing expanded perlite based mortar (EPBM) was investigated. For this purpose, twelve LFPs with one or two layers of wire mesh were ... -
Contact angle measurements on lignite surface
(2010)Froth flotation has been widely used for cleaning and desulfurisation of coals for many decades all over the world. There is a close relationship between floatability of minerals and contact angle. Therefore surface ... -
Conversion of coal-fired bottom ash to fuel and construction materials
(Taylor & Francis LTD, 2017)In this study, solid wastes taken from Seyitomer coal-fired power plant bottom ashes were subjected to experimental research to obtain a carbon-rich fraction. The possible recycling opportunities of remaining inorganic ... -
Copyrolysis of seyitomer-lignite and safflower seed: Influence of the blending ratio and pyrolysis temperature on product yields and oil characterization
(American Chemical Society, 2007)Pyrolytic behaviors of biomass/coal mixtures were investigated under a heating rate of 7 degrees C min(-1), over a range of pyrolysis temperatures between 400 and 700 degrees C, and the blending ratio of coal in mixtures ... -
Damage assessment and mortar identification in Beylerbeyi palace
(2010)The historical building stock and seismic risk of Anatolia draws considerable attention of the engineers for studying the construction techniques and the earthquake performance of these structures. This study is dealing ... -
Desulphurization of lignites by slow, fast, and flash pyrolysis and high intensity dry magnetic separation
(Taylor & Francis Inc, 2007)Slow, fast and flash pyrolysis followed by high intensity dry magnetic ( HIDM) separation experiments were conducted to obtain improved solid fuels. Pyrolysis experiments were performed in three different apparatus, and ... -
Determination of synergetic effect in co-pyrolysis of lignite and waste tyre
(Elsevier Sci LTD, 2015)An attempt was made to investigate potential synergistic activities between waste tyre and lignite during co-pyrolysis. The parameters such as blending ratios of waste tyre and lignite, final pyrolysis temperature, heating ... -
The effect of cover thickness on rebars exposed to elevated temperatures
(Elsevier Sci LTD, 2008)In this study, the mechanical properties of structural rebars have been investigated after exposure of elevated temperatures. The mortar was prepared with CEM I 42.5N cement and fired clay. The S 420a, circle divide 16 mm ... -
Effect of curing time on selected properties of soil stabilized with fly ash, marble dust and waste sand for road sub-base materials
(SAGE Publications LTD, 2017)The properties of sub-base filling materials in highway construction are essential, as they can determine the performance of the road in service. Normally, the existing materials are removed and replaced with new materials ... -
Effect of expanded perlite aggregate on the properties of lightweight concrete
(Elsevier Science Sa, 2008)Expanded perlite aggregate (EPA) is a heat and sound insulator, and lightweight material which ensures economical benefits in constructions. This paper investigates the properties of concrete containing EPA considering ... -
The effect of ground granulated blast-furnace slag on properties of Horasan mortar
(Elsevier Sci LTD, 2013)Mortars containing brick or tile powder and lime are called Horasan mortar in Ottoman and Cocciopesto in ancient Roman. In this study, ground granulate blast-furnace slag was used in Horasan mortars to obtain improvements ... -
Effects of wollastonite and barite on the physical properties of a ceramic body
(Techna Srl, 2004)Ceramic Factory, located Mid-West of Turkey, produces wall,and floor tiles. The factory recipe consists mainly of clay, pegmatite, quartz, albite and calcite. Wollastonite and barite were introduced into the factory recipe ... -
Electron beam welding varestraint test of ALLVAC 718 Plus™ for aviation technology
(2012)The improvements of materials used in aircraft gas turbine engines which constitute 50% of total aircraft weight must protect its actuality continuously. Utilization of super alloys in aerospace and defense industries can ... -
Evaluation of combined lignite cleaning processes, flotation and microbial treatment, and its modelling by Box Behnken methodology
(Elsevier Sci LTD, 2017)In this study, first, the physicochemical cleaning of Cayirhan region's low-quality lignites was investigated by flotation to reduce ash content. In the flotation experiments, the effects of collector dosage, frother dosage, ... -
Examples for the recent developments in technical yarns [Teknik ipliklerde son yillardaki gelişmelere örnekler]
(2013)Technical yarns are developed and manufactured to meet the technical functions which are demanded from the product at its end-use. Along with the improvement in new technologies, textile products gain variety. Also new ... -
An Experimental Analysis of Air Source Heat Pump Water Heater
(Turkish Soc Thermal Sciences Technology, 2012)Heating and cooling are one of the fundamental research area for the engineers. Due to increment of the energy demand and decrement on the sources leads the researchers to develop the recent systems and find out new systems. ... -
An experimental study on the evaluation of concrete test results
(2012)The compressive strength test applied to standard samples is one of the most important tests indicating the quality of concrete in structures. The results of the standard tests are compared with the values used in design ...