Başlık için Kimya Mühendisliği Bölümü listeleme
Toplam kayıt 233, listelenen: 60-79
-
The effect of a sweeping gas flow rate on the fast pyrolysis of biomass
(Taylor & Francis Inc, 2002)Sunflower (Helianthus annus L.)-pressed bagasse pyrolysis experiments were performed in a fixed-bed tubular reactor. The effects of nitrogen flow rate and final pyrolysis temperature on the pyrolysis product yields and ... -
Effect of Carbon Black and/or Elastomer on Thermoplastic Elastomer-based Blends and Composites
(Amer Inst Physics, 2015)It was aimed to investigate the effect of carbon black and/or elastomer on the electrical conductivity and mechanical properties of thermoplastic elastomer (TPE). Carbon black (CB) and ethylene-glycidyl methacrylate (E-GMA) ... -
Effect of Lignite Addition and Steam on the Pyrolysis of Turkish Oil Shales
(Butterworth-Heinemann LTD, 1992)Steam was found to be a more effective sweep gas than nitrogen at low velocities in fixed-bed pyrolysis of Goynuk oil shale but, at higher velocities and in fluidized-bed pyrolysis, the differences were considerably less ... -
Effect of operating parameters on bio-fuel production from waste furniture sawdust
(SAGE Publications LTD, 2013)Fast pyrolysis is an effective technology for conversion of biomass into energy and value- added chemicals instead of burning them directly. In this study, fast pyrolysis of waste furniture sawdust (pine sawdust) was ... -
The effect of pyrolysis atmosphere on bio-oil yields and structure
(Taylor & Francis Inc, 2017)A food industry waste, almond shell, was pyrolyzed under three different environment static, nitrogen, and steam to produce bio-oil and its derivatives. The oil yield obtained at pyrolysis temperature of 600 degrees C was ... -
Effect of steam on the pyrolysis of biomass
(Taylor & Francis Inc, 2006)A comparative study of the thermochemical behavior of cottonseed cake in static, nitrogen and steam atmospheres has been carried out. The influence of the different atmospheres in the yield and composition were observed. ... -
Effect of Temperature and Time on the Steam Pretreatment of Hazelnut Shells for the Enzymatic Saccharification
(Aidic Servizi Srl, 2014)Saturated steam pretreatment of hazelnut shells was studied for fermentable sugars after enzymatic hydrolysis. The elevation of temperature (from 160 to 200 degrees C) and time (0-30 min) of steam pretreatment were ... -
Effect of the comonomer content on the solid-state mechanical and viscoelastic properties of poly(propylene-co-1-butene) films
(Wiley, 2018)In this study, we quantified the thermal and solid-state mechanical and viscoelastic properties of isotactic polypropylene (i-PP) homopolymer and poly(propylene-1-butene) copolymer films having a 1-butene ratio of 8, 12, ... -
Effect of ZnO type and concentration on the mophology, thermal, and mechanical properties of poly(ether ester)/ZnO composites
(Wiley-Blackwell, 2013)Poly(ether ester) (PEE) copolymers were synthesized in a two-stage process involving transesterification and polycondensation. The synthesized copolymer and the zinc oxide (ZnO) were used in composite preparation by melt ... -
The Effects of Different Catalysts on the Pyrolysis of Thistle, Onopordum Acanthium L.
(Taylor & Francis Inc, 2013)Fixed-bed fast pyrolysis experiments have been conducted on a sample of thistle, Onopordum Acanthium L. The experiments were performed in a fixed-bed tubular pyrolysis reactor to investigate the effects of sweeping gas ... -
Effects of Mass-Transfer and Hydrogen Pressure on the Fixed-Bed Pyrolysis of Sunflower Bagasse
(American Chemical Society, 1994)… -
Effects of processing on the properties of chitosan/cellulose nanocrystal films
(Elsevier Sci LTD, 2015)Biocomposites of chitosan (CS)/cellulose nanocrystals (CN) were prepared by using solution casting method. Influences of solution preparation method and CN content on the properties of composites were investigated. Mechanical ... -
The efficacy of a novel antibacterial hydroxyapatite nanoparticle-coated indwelling urinary catheter in preventing biofilm formation and catheter-associated urinary tract infection in rabbits
(Springer, 2011)The aim of this study was to investigate of the efficacy and reliability of a novel antimicrobial hydroxyapatite (HA) nanoparticle coating of urethral catheters, in the prophylaxis of biofilm formation and bacteriuria in ... -
Electrochemical treatment of water containing dye-stuffs: Anodic oxidation of congo red and xiron blau 2rhd
(1992)Removal of Congo Red and Xiron Blau 2RHD from their aqueous solutions has been carried out in a trickle tower electrochemical reactor. The effects of initial dye concentration, applied potential and solution flow rate on ... -
Electrode optimization for direct methanol fuel cells
(ENEA, 2009)In this study, the Taguchi method was used to optimize the structural combination of electrode constituents of a direct methanol fuel cell (DMFC). The variance analysis was also performed in order to determine the optimum ... -
Energy applications of biomass: Pyrolysis of apricot stone
(Taylor & Francis Inc, 2006)Apricot stone (Prunus armeniaca L.) was pyrolyzed in a directly heated fixed-bed reactor under nitrogen atmosphere. Effects of sweeping gas flow rates and pyrolysis temperature on the pyrolysis of the biomass were also ... -
Energy consumption of biodiesel production from microalgae oil using homogeneous and heterogeneous catalyst
(Springer Verlag, 2014)Transesterification reaction of the new generating biofuel resource, microalgae was conducted. In order to evaluate the effects of reaction variables such as catalyst type (KOH, NaOH), catalyst amount (1-1.5 % w/w), ... -
An energy crop for producing bio-fuel: Euphorbia rigida
(Norwegian University Sci Technol, 2005)Biomass and energy crops are the renewable energy sources, which is often believed to have the highest potential to contribute to a future sustainable energy supply to world's energy. Bioenergy is expected to become one ... -
Enhancement of adhesion between high density polyethylene and poly(ethylene terephthalate) films
(2004)Blends of high density polyethylene (HDPE) and ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) prepared in a twin-screw extruder, were used to improve the adhesion between HDPE and poly(ethylene terephthalate), ...