Ara
Toplam kayıt 12, listelenen: 1-10
Thermo-catalytic co-pyrolysis of recovered heavy oil and municipal plastic wastes
(Elsevier Science BV, 2016)
In this work municipal plastic wastes were co-pyrolyzed together with waste plastic derived heavy oil at 500 degrees C in a stirred batch reactor using beta-zeolite, y-zeolite and m-Ni-Mo-catalysts. The effect of the heavy ...
Catalytic pyrolysis of perennial shrub, Euphorbia rigida in the water vapour atmosphere
(Elsevier Science BV, 2005)
In this study, the perennial shrub Euphorbia rigida, was used as biomass sample for catalytic pyrolysis using Co-Mo commercial catalyst (Criterion-534) in the water vapour atmosphere. Experimental studies were conducted ...
Influence of temperature and alumina catalyst on pyrolysis of corncob
(Elsevier Sci LTD, 2009)
Corncob has been investigated as an alternative feedstock to obtain fuels and chemicals via pyrolysis in fixed-bed reactor. The influence of pyrolysis temperature in the range 300-800 degrees C as well as the catalyst ...
Rapid and slow pyrolysis of pistachio shell: Effect of pyrolysis conditions on the product yields and characterization of the liquid product
(John Wiley & Sons LTD, 2007)
This study reports the experimental results for the pyrolysis of pistachio shell under different conditions in a tubular reactor under a nitrogen flow. For the different conditions of pyrolysis temperature, nitrogen flow ...
Pressurized pyrolysis of dried distillers grains with solubles and canola seed press cake in a fixed-bed reactor
(Elsevier Sci LTD, 2015)
Pressurized pyrolysis of biomasses was carried in a fixed bed reactor to obtain gases, bio-oils and chars at elevated temperatures. The products were characterized by GC-MS, FTIR, viscometer, SEM, BET and EDXRFS methods. ...
Comparison of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part II: Contaminants, char and pyrolysis oil properties
(Elsevier Sci LTD, 2013)
Pyrolysis of real wastes (MPW and MSW) has been investigated at 500 degrees C, 550 degrees C and 600 degrees C using Y-zeolite, beta-zeolite, equilibrium FCC, MoO3, Ni-Mo-catalyst, HZSM-5 and Al(OH)(3) as catalysts. The ...
Synthetic fuel production from tea waste: Characterisation of bio-oil and bio-char
(Elsevier Sci LTD, 2010)
The pyrolysis of tea waste was studied for determining the main characteristics and quantities of liquid and solid products. Particular investigated process variables were temperature (673-973 K), heating rate (5-700 K min ...
Evaluation of the role of the pyrolysis temperature in straw biomass samples and characterization of the oils by GUMS
(American Chemical Society, 2008)
The aim of this study is to investigate the variation of thermal conversion of agricultural wastes in a fixed bed reactor with temperature and elucidating the chemical structure of oil products formed during the process. ...
Optimization of bio-oil production using response surface methodology and formation of polycyclic aromatic hydrocarbons (PAHs) at elevated pressures
(Elsevier Science BV, 2016)
This paper aims at the optimization of bio-oil yield obtained from poplar sawdust pyrolysis. A response surface methodology was carried out to optimize the experimental conditions. The factors investigated were temperature, ...
Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil properties
(Elsevier Sci LTD, 2013)
Pyrolysis of municipal solid waste (MSW) and municipal plastic waste (MPW) have been investigated in batch reactor at 500, 550 and 600 degrees C both in absence and presence of catalysts (Y-zeolite, beta-zeolite, equilibrium ...