Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 286, listelenen: 205-224
-
Rapid Pyrolysis of Olive Residue. 2. Effect of Catalytic Upgrading of Pyrolysis Vapors in a Two-Stage Fixed-Bed Reactor
(American Chemical Society, 2009)The upgrading of the rapid pyrolysis vapors was performed using various catalysts (clinoptilolite (a natural zeolite, NZ), ZSM-5, H-Y) with catalyst/feed ratios of 0.05, 0.1, 0.15, 0.20, and 0.25 in the catalyst bed ... -
Re-use of mud from process waste water purification plant in ceramic tile production
(Techna Srl, 2010)Turkey is the fifth biggest ceramic tile exporter of the world. Considering the expectation that the Turkish tile sector continues to expand, further studies both on the improvement and the development of the tile formulations ... -
The reaction kinetics of rice husk based cordierite ceramics
(Elsevier Sci LTD, 2008)In this study, rice husk ash (RHA) was used as a silica source for cordierite production. Two different groups of samples were prepared in order to achieve the synthesis of cordierite. In the first group (HS-0), kaolinite, ... -
Reaction-bonded aluminium oxide (RBAO) process: II, the solid-state oxidation of RBAO compacts
(2000)The oxidation kinetics and the fraction of aluminum that is oxidized via solid-gas reaction in reaction-bonded aluminum oxide (RBAO) compacts are shown to be strongly dependent on the oxidation temperature and the ... -
Relationship between heating atmosphere and copper foil impurities during graphene growth via low pressure chemical vapor deposition
(Pergamon-Elsevier Science LTD, 2016)Low-pressure chemical vapor deposition synthesis of graphene films on two different Cu foils, with different surface oxygen and carbon contents, was performed by controlling H-2 and/or Ar flow rates during heating. The ... -
The Role of Cation Concentration on Particle Formation Mechanism during Hydrothermal Synthesis of Nanosized Tin Oxide (SnO2)
(Springer, 2016)Preparation of SnO2 particles via hydrothermal synthesis was investigated as a function of cation concentration and treatment time to develop a fundamental understanding on determination of effective formation and growth ... -
The role of hydrothermal pathways in the evolution of the morphology of ZnO crystals
(Elsevier Sci LTD, 2016)Understanding growth mechanisms usually leads to the successful preparation of a targeted microstructure. However, the large number of parameters that influence the shape and the size of nanostructures often make it difficult ... -
Role of organic additives on non-aqueous tape casting of SiAlON ceramics
(Elsevier Sci LTD, 2011)Suspensions consisting of precursor alpha/beta SiAlON forming powders azeotropic solvent mixture of 60 MEK/40E dispersant binder, and plasticizer were optimized for tape casting by theological measurements and tape properties ... -
The role of viscosity on microstructure development and stain resistance in porcelain stoneware tiles
(Elsevier Sci LTD, 2010)Effect of composition on viscosity of porcelain stoneware tiles and role of the viscosity on microstructure development and stain resistance in porcelain stoneware tiles were investigated. The viscosity of the tiles was ... -
Roles of CaO, MgO and SiO2 on crystallization and microstructure development in diopside-based glass-ceramic glazes under industrial fast-firing condition
(Australian Ceramic Society, 2017)The research objective of the study was to increase the current understanding about how oxide compositions (CaO, MgO and SiO2 ratios) influence the (1) crystallization behaviour of starting frits, and subsequently (2) ... -
Scanning electron microscopy and micro-Raman spectroscopy of slip layers of Hellenistic ceramic wares from Dorylaion/Turkey
(Elsevier Sci LTD, 2011)Anatolia (Asia Minor) was inhibitated by several civilizations during the history. Dorylaion at Eskisehir/Turkey, an ancient site, is on the crossroads of many ancient civilizations. Artifacts belonging to different ... -
Seramik Sağlık Gereçleri Bünyelerinde Camsı Faz Kompozisyonunun Pişirim Sıcaklıklarına Etkisi
(2013)Bu çalışmada seramik sağlık gereçleri bünyelerinde, kimyasal kompozisyonla birlikte camsı faz viskozitesinin değişimi incelenmiştir. Ayrıca, bu değişimin sinterleme sıcaklıkları üzerine etkisi araştırılmıştır. Seramik ... -
SERAMİK SAĞLIK GEREÇLERİ BÜNYELERİNDE CAMSI FAZ KOMPOZİSYONUNUN PİŞİRİM SICAKLIKLARINA ETKİSİ
(2013)Bu çalışmada seramik sağlık gereçleri bünyelerinde, kimyasal kompozisyonla birlikte camsı faz viskozitesinin değişimi incelenmiştir. Ayrıca, bu değişimin sinterleme sıcaklıkları üzerine etkisi araştırılmıştır. Seramik bünyedeki, ... -
SERT HAMMADDE TANE BOYUTUNUN SAĞLIK GEREÇLERİ PORSELENİNİN FİZİKSEL ÖZELLİKLERİNE ETKİSİ
(2011)üretiminde kullanılan hammaddelerden kuvars kumu ve feldispat sert hammaddelerdir. Sert hammaddelerin tane boyut dağılımının seramik bünyelerin sinterlenme davranışını ve fiziksel ve mekanik özelliklerini etkilediği bi ... -
Silanization of boron nitride nanosheets (BNNSs) through microfluidization and their use for producing thermally conductive and electrically insulating polymer nanocomposites
(Academic Press Inc Elsevier Science, 2017)Chemical exfoliation of boron nitride nanosheets (BNNSs) from large flakes of specially synthesized micro-sized hexagonal boron nitride (h-BN) ceramics was carried out through microfluidization. The surface of BNNSs obtained ... -
Silver ion doped ceramic nano-powder coated nails prevent infection in open fractures: In vivo study
(Elsevier Sci LTD, 2016)Background: Despite improvement in operative techniques and antibiotic therapy, septic complications still occur in open fractures. We developed silver ion containing ceramic nano powder for implant coating to provide not ... -
A Silver Ion-doped Calcium Phosphate-based Ceramic Nanopowder-coated Prosthesis Increased Infection Resistance
(Springer, 2013)Despite progress in surgical techniques, 1% to 2% of joint arthroplasties become complicated by infection. Coating implant surfaces with antimicrobial agents have been attempted to prevent initial bacterial adhesion to ... -
Single Crystal Growth and Texturing of Lead-Based Piezoelectric Ceramics Via Templated Grain Growth Process
(World Scientific Publ Co Pte LTD, 2008)In the field of high-performance piezoelectric materials, PMN-PT single crystals and textured ceramics have been attracting increased research interest for several years. On the other hand, the growth of single crystals ... -
Single crystal growth in PMN-PT and PMN-PZT
(Springer, 2009)Single crystal growth of lead-based piezoelectric ceramics Pb(Mg(1/3)Nb(2/3))(0.68)Ti(0.32)O(3) (PMN-32PT) and Pb(Mg(1/3)Nb(2/3))(0.42)(Ti(0.638)Zr(0.362))(0.58)O(3) (PMN-37PT-21PZ) ceramics via templated grain growth (TGG) ... -
Sintering behaviour of precursor mullite powders and resultant microstructures
(Elsevier BV, 1996)Crystallization and sintering behaviour of two structurally different diphasic precursor mullite powders were studied. Powder derived from boehmite and colloidal silica formed mullite at around 1250°C and could be sintered ...