Ara
Toplam kayıt 26, listelenen: 11-20
An investigation of Hellenistic period pottery production technology from Harabebezikan/Turkey
(Elsevier Sci LTD, 2011)
Upper ancient Mesopotamia is a part of Southeastern Anatolia and irrigated by the Euphrates and Tigris rivers. It has several sites, ruins and monuments belonging to ancient civilizations. Among these, an ancient site ...
Role of organic additives on non-aqueous tape casting of SiAlON ceramics
(Elsevier Sci LTD, 2011)
Suspensions consisting of precursor alpha/beta SiAlON forming powders azeotropic solvent mixture of 60 MEK/40E dispersant binder, and plasticizer were optimized for tape casting by theological measurements and tape properties ...
Characterization of diopside-based glass-ceramic porcelain tile glazes containing borax solid wastes
(Korean Assoc Crystal Growth, Inc, 2011)
In recent years glass-ceramic systems became industrially important for their high softening point, good coating capability for relevant substrates and high chemical and abrasion resistance. The ZrO2-CaO-MgO-SiO2 (ZrCMS) ...
Characterization of underclays from Agacli-Kemerburgaz region of Istanbul/Turkey and their evaluation for porcelain tile production
(Techna Srl, 2011)
gacli-Kemerburgaz area, NW of Istanbul, is one of the most important underclay deposits of Turkey This area is composed of Paleozoic sedimentary sequence, Upper Cretaceous volcanic rocks, Neogene sediments and Quaternary ...
The third order nonlinear optical characteristics of amorphous vanadium oxide thin film
(Springer, 2011)
We studied the nonlinear absorptive characteristics (saturation intensity threshold and effective nonlinear absorption coefficients) and nonlinear refraction in a 50-nm-thick VO (x) thin amorphous film prepared by pulsed ...
Influence of cell aspect ratio on architecture and compressive strength of titanium foams
(Elsevier Science Sa, 2011)
Titanium foams have been of interest in dental and orthopedic implants over the past few decades on account of their excellent mechanical properties, chemical stability, and biocompatibility. A powerful tool, X-ray computed ...
Black ceramic pigments for porcelain tile bodies produced with chromite ores and iron oxide waste
(Korean Assoc Crystal Growth, Inc, 2011)
In this study, two different natural chromite ores and iron oxide waste from the steel rolling industry were used as less expensive alternative raw materials for the synthesis of black ceramic pigments to be used in porcelain ...
Preparation and characterization of photochromic effect for ceramic tiles
(Soc Espanola Ceramica Vidrio, 2011)
Ceramic tile industry is developing due to the technological researches in scientific area and new tiles which are not only a traditional ceramic also have many multiple functionalities have been marketed nowadays. These ...
Solubility of blue CoAl2O4 ceramic pigments in water and diethylene glycol media
(Elsevier Sci LTD, 2011)
The chemical stability of blue CoAl2O4 ceramic pigment in aqueous and non-aqueous suspension was investigated. Distilled water and diethylene glycol (DEG) were used as media. The isoelectric points (IEP) for the commercial ...
Towards atomic scale engineering of rare-earth-doped SiAlON ceramics through aberration-corrected scanning transmission electron microscopy
(Pergamon-Elsevier Science LTD, 2011)
Direct visualization of rare earths in alpha- and beta-SiAlON unit-cells is performed through Z-contrast imaging technique in an aberration-corrected scanning transmission electron microscope. The preferential occupation ...