Ara
Toplam kayıt 237, listelenen: 11-20
Characterization of mechanical properties of porcelain tile using ultrasonics
(2012)
Ultrasound affords a very useful and versatile non-destructive method, using a large application area, for evaluating the microstructure and mechanical properties of materials. In this study, porcelain tiles were sintered ...
Investigation of the Strength of Floor Tiles by Using An Experimental Design Method
(Australian Ceramic Society, 2015)
The main objective of this work is to determine the main parameters affecting the strength properties of floor tiles. For this purpose, the effect of various ratios of the components in the Seger formulation on fast firing ...
Sintering of 94Na0.5Bi0.5TiO3-6BaTiO3 with SPS and conventional methods for crystal growth
(Hanyang University, 2016)
In this study, lead-free 94Na0.5Bi0.5TiO3-6BaTiO3 (94NBT-6BT) piezoelectric ceramics and embedded single crystals in polycrystalline 94NBT-6BT matrix were sintered by conventional (CS) and spark plasma sintering (SPS) ...
Thermal Curing Behavior of MWCNT Modified Vinyl Ester-Polyester Resin Suspensions Prepared with 3-Roll Milling Technique
(Wiley, 2009)
This study aims to investigate the curing behavior of a vinyl ester-polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT-NH2). For this ...
Polarized emission from CsPbBr3 nanowire embedded-electrospun PU fibers
(IOP Publishing LTD, 2018)
Interest in all-inorganic halide perovskites has been increasing dramatically due to their high quantum yield, band gap tunability, and ease of fabrication in compositional and geometric diversity. In this study, we ...
Carbon nanotube/boehmite-derived alumina ceramics obtained by hydrothermal synthesis and spark plasma sintering (SPS)
(Elsevier Sci LTD, 2010)
Preparation, structure and properties of hydrothermally treated carbon nanotube/boehmite (CNT/gamma-AlOOH) and densification with spark plasma sintering of Al2O3 and CNT/Al2O3 nanocomposites were investigated. Hydrothermal ...
Effect of passivation and precipitation hardening on processing and mechanical properties of B4C-Al composites
(Elsevier Sci LTD, 2011)
Boron carbide aluminium composites were produced by infiltrating aluminium alloys into porous boron carbide preforms at different temperatures under an argon gas atmosphere. Aim of this study was controlling the reaction ...
Development of a multipurpose tile body: Phase and microstructural development
(Elsevier Sci LTD, 2006)
In this study, an attempt was made in order to develop a multipurpose tile body using a single formulation. In order to achieve this, several body recipes were prepared using mainly local raw materials with clearly defined ...
A comparative study of SiAlON ceramics
(Elsevier Sci LTD, 2012)
Two different varieties of Si3N4 powders were used to prepare SiAlON ceramics. 100% beta-Si3N4 was used from refractory grade powders (B1) and another purer 98% alpha-Si3N4 (50A) powder was used to prepare the SiAlON ...
Catalytic pyrolysis of biomass in inert and steam atmospheres
(Elsevier Sci LTD, 2008)
The objective of this study was to investigate thermal conversion of a perennial shrub, Euphorbia rigida biomass sample with catalyst in inert (N-2) and steam atmospheres. Experimental studies were conducted in a well swept ...