Ara
Toplam kayıt 267, listelenen: 1-10
Thermal Curing Behavior of MWCNT Modified Vinyl Ester-Polyester Resin Suspensions Prepared with 3-Roll Milling Technique
(Wiley, 2009)
This study aims to investigate the curing behavior of a vinyl ester-polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT-NH2). For this ...
Polarized emission from CsPbBr3 nanowire embedded-electrospun PU fibers
(IOP Publishing LTD, 2018)
Interest in all-inorganic halide perovskites has been increasing dramatically due to their high quantum yield, band gap tunability, and ease of fabrication in compositional and geometric diversity. In this study, we ...
Carbon nanotube/boehmite-derived alumina ceramics obtained by hydrothermal synthesis and spark plasma sintering (SPS)
(Elsevier Sci LTD, 2010)
Preparation, structure and properties of hydrothermally treated carbon nanotube/boehmite (CNT/gamma-AlOOH) and densification with spark plasma sintering of Al2O3 and CNT/Al2O3 nanocomposites were investigated. Hydrothermal ...
Alternating current electrophoretic deposition of HA and hBN nanoparticles on Ti substrate
(2017)
Hydroxyapatite (HA) and hexagonal boron nitride (hBN) are biocompatible materials. In this study, nano HA and nano hBN particles were used for coatings on titanium (Ti) substrate. The nanoparticles were deposited on Ti ...
Effect of passivation and precipitation hardening on processing and mechanical properties of B4C-Al composites
(Elsevier Sci LTD, 2011)
Boron carbide aluminium composites were produced by infiltrating aluminium alloys into porous boron carbide preforms at different temperatures under an argon gas atmosphere. Aim of this study was controlling the reaction ...
Development of a multipurpose tile body: Phase and microstructural development
(Elsevier Sci LTD, 2006)
In this study, an attempt was made in order to develop a multipurpose tile body using a single formulation. In order to achieve this, several body recipes were prepared using mainly local raw materials with clearly defined ...
A comparative study of SiAlON ceramics
(Elsevier Sci LTD, 2012)
Two different varieties of Si3N4 powders were used to prepare SiAlON ceramics. 100% beta-Si3N4 was used from refractory grade powders (B1) and another purer 98% alpha-Si3N4 (50A) powder was used to prepare the SiAlON ...
Catalytic pyrolysis of biomass in inert and steam atmospheres
(Elsevier Sci LTD, 2008)
The objective of this study was to investigate thermal conversion of a perennial shrub, Euphorbia rigida biomass sample with catalyst in inert (N-2) and steam atmospheres. Experimental studies were conducted in a well swept ...
Zircon-free frits suitable for single fast-firing opaque wall tile glazes and their industrial productions
(Elsevier Sci LTD, 2009)
Wall tile glazes with a smooth surface texture, high glossiness, and whiteness are usually based on zirconium containing frits. However, these frits are quite expensive and therefore, there have recently been certain ...
The microstructural features of an alumina-mullite-zirconia refractory material corroded by molten glass
(Elsevier Sci LTD, 2003)
An alumina-mullite-zirconia refractory penetrated by a standard soda-lime-silica glass was statically tested at 1370 degreesC for 72 h. Microstructural features and EDAX analysis of the compositions in the corroded region ...