Ara
Toplam kayıt 8, listelenen: 1-8
Re-use of muds from glazing and pressing lines of ceramic tile industry in wall and floor type formulations
(Minerals, Metals & Materials Soc, 2006)
Turkey is the fifth biggest ceramic tile exporter in the world. Considering the expectation that the Turkish tile sector continues to expand, further studies both on the improvement and the development of tile formulations ...
Effect of different nucleation temperatures on the microstructural development of alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)
alpha-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ...
Mg+2 and Ce+3 doped ?-SiAlON ceramics
(2004)
In the present work, stabilization of MgO and CeO2 in ?-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830°C for 1 hour in gas pressure sintering furnace ...
Mg+2 and Ce+3 doped alpha-SiAlON ceramics
(Trans Tech Publications LTD, 2004)
In the present work, stabilization of MgO and CeO2 in alpha-SiAlON structure is studied. Mg and CeO2 were used in 50:50 molar ratios as additives. The mixture was sintered at 1830degreesC for 1 hour in gas pressure sintering ...
Investigation of borax waste behaviour in tile production
(Elsevier Sci LTD, 2007)
Although there are various studies published in the relevant literature on the use of borates in tile production, borax waste has been mainly used in place of feldspar and the results showed that borate migration to the ...
Investigation of parameters affecting formation of mullite from kaolin
(Trans Tech Publications LTD, 2004)
This study aims to improve the understanding of formation of mullite from kaolin at low process temperature using different sintering regimes. The optimum parameters affecting mullite formation from kaolin such as sintering ...
Development of laminar type functionally graded SiAlON ceramics
(Trans Tech Publications LTD, 2004)
In order to combine high hardness with high toughness, laminar type (two layers) functionally graded (FGM) SiAlON ceramics were developed. In a previous study achieved by the same authors, presence of a sharp transition ...
Effect of different nucleation temperatures on the microstructural development of ?-SiAlON ceramics
(2004)
?-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ...