Ara
Toplam kayıt 9, listelenen: 1-9
Influence of Deposition Technique on Growth and Resistivity of Ta/NiFe Nano Films.
(Int Union Crystallography, 2009)
…
Surface and Interface Study of Vanadium Oxide Nano Films
(Int Union Crystallography, 2009)
…
A Novel Approach For Preparing Electrically Conductive SiAlON-TiN Composites by Spark Plasma Sintering
(Trans Tech Publications LTD, 2009)
An effective approach for preparing electrically conductive SiAlON-TiN composites was developed. Granules of a designed composition of alpha-beta SiAlON was obtained by spray drying and coated with varying amounts of TiO(2) ...
Interactions Between AlN and SiAlON Ceramics
(Trans Tech Publications LTD, 2009)
In the present study, interactions between AlN and SiAlON laminated couples were investigated after gas pressure (GPS) and spark plasma sintering (SPS) by scanning electron microscopy (SEM) and energy dispersive x-ray ...
Designing compressive properties of titanium foams
(Springer, 2009)
Titanium foams were produced by optimizing a relatively cheap method, sintering under flowing high purity argon gas with fugitive space holder. Removal of the space holder was conducted by dissolution in hot deionized water ...
A Preliminary Study on Cell Wall Architecture of Titanium Foams
(Materials Research Soc, 2009)
Bio-inspired architectures, especially metallic foams, have been receiving an increasing interest for the last 10 years due to their unusual mechanical properties. Among commonly dealt foamed metals, like aluminum and ...
Development of alpha-beta SiAlON ceramics from different Si3N4 starting powders
(Trans Tech Publications LTD, 2009)
alpha-beta SiAlON ceramics were produced from different starting Si3N4 powders including beta-Si3N4 and alpha-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, ...
Pressureless Melt Infiltrated Non-Oxide Ceramic-Metal Composites
(Trans Tech Publications LTD, 2009)
In the present study highly dense (open porosity < 1 %), light-weight (d <= 2.85 g/cm(3)) and Al(4)C(3)-free non-oxide ceramic-metal composites were produced at comparatively low temperatures (<= 1250 degrees C) by pressurless ...
Spark Plasma Sintering of Silicon Nitride-Boron Carbide Composites
(Trans Tech Publications LTD, 2009)
Si(3)N(4)-B(4)C composites containing fine and coarse B(4)C particles were produced using Al(2)O(3) and Y(2)O(3) as sintering additives via spark plasma sintering (SPS) technique. Phase assemblages of the produced composites ...