Güncel Gönderiler: Bildiri Koleksiyonu
Toplam kayıt 150, listelenen: 121-140
-
Use of borax solid wastes in diopside based glass-ceramic floor tile glazes
(Minerals, Metals & Materials Soc, 2006)Boron raw materials are amongst the most important natural sources for many industrial branches and their values become increasingly raised with the discovery of boron usage in many new technological fields. All the countries ... -
Usability of industrial ashes in cement production as pozzolanic materials
(Minerals, Metals & Materials Soc, 2006)In the present study the utilization of coal ashes that appear at the end of firing process of brick production in cement pastes was examined. Ashes with three different particle sizes of 75 gm, 106 pm and 150 gm were used ... -
Utilization of refractory brick wastes in concrete production as aggregates
(Minerals, Metals & Materials Soc, 2006)The refractory bricks of a rotary cement furnace containing of alumina and magnesium chromite were studied in order to determine whether they could be used in the concrete production as aggregates. Three mortars were ... -
Development of alpha-beta SiAlON ceramics from different Si3N4 starting powders
(Trans Tech Publications LTD, 2009)alpha-beta SiAlON ceramics were produced from different starting Si3N4 powders including beta-Si3N4 and alpha-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, ... -
Re-use of muds from glazing and pressing lines of ceramic tile industry in wall and floor type formulations
(Minerals, Metals & Materials Soc, 2006)Turkey is the fifth biggest ceramic tile exporter in the world. Considering the expectation that the Turkish tile sector continues to expand, further studies both on the improvement and the development of tile formulations ... -
Effects of Alumina and White Fused Alumina Addition on Transparent Wall and Floor Tile Glazes
(Polish Acad Sciences Inst Physics, 2015)In tile manufacturing, alpha-Al2O3 is the main type of alumina used in ceramic body and glaze formulations. This raw material acts as an pacifier in porcelain tile bodies and as a matting agent in glazes. White fused alumina ... -
Influence of type of cations on intergranular phase crystallisation of SiAlON ceramics
(Trans Tech Publications LTD, 2007)25 alpha:75 beta SiAION composition was designed with different cations and at different molar ratios. Effect of the type of cations both on the composition and the type of intergranular phase investigated after gas pressure ... -
Spinel nitrides transparent ceramics
(Elsevier Sci LTD, 2015)Aluminum oxy-nitride (AlON), a solid solution in the binary phase diagram of Al2O3-AlN, is a relatively new spinel type material. In the present study, the optimum sintering agent and sintering conditions of AlON were ... -
Interactions Between AlN and SiAlON Ceramics
(Trans Tech Publications LTD, 2009)In the present study, interactions between AlN and SiAlON laminated couples were investigated after gas pressure (GPS) and spark plasma sintering (SPS) by scanning electron microscopy (SEM) and energy dispersive x-ray ... -
Pressureless Melt Infiltrated Non-Oxide Ceramic-Metal Composites
(Trans Tech Publications LTD, 2009)In the present study highly dense (open porosity < 1 %), light-weight (d <= 2.85 g/cm(3)) and Al(4)C(3)-free non-oxide ceramic-metal composites were produced at comparatively low temperatures (<= 1250 degrees C) by pressurless ... -
LPG sensing characteristics of electrospray deposited SnO2 nanoparticles
(Elsevier Science BV, 2014)In this study, SnO2 films were fabricated on conductive substrate such as aluminum and platinum coated alumina using electro-spray deposition (ESD) method for gas sensor applications. Solution flow rate, coating time, ... -
Al stabilized Li7La3Zr2O12 solid electrolytes for all-solid state Li-ion batteries
(Pergamon-Elsevier Science LTD, 2016)All Solid State Lithium Ion Batteries (ASS-LIB) have been attracting great attention due to their high temperature stability, energy density and safety. Cubic Li7La3Zr2O12 (LLZO) ceramic electrolyte is one of the most ... -
Development of Thermoacoustic Imaging System: Preliminary Experimental Results
(IEEE, 2017)Mammography and ultrasound are commonly used techniques for detection and follow-up of breast cancer. Microwave induced thermoacoustic imaging is a new non-ionizing imaging modality that can facilitate early detection and ... -
Structural and Electrical Characterization of Electro Spray Deposited PZT Sol-PZT Nanopowder Composite Thick Films
(IEEE, 2014)In piezoelectric market, infrared detectors, pyroelectric and piezoelectric sensors, microwave devices, actuators, transducers, non-volatile random access memories, and micro electromechanical systems are fabricated using ... -
Effect of the Powder Process Type on Dielectric and Leakage Current Characteristics of Flux Grown 94NBT-6BT Single Crystals
(IEEE, 2014)In this study, 94NBT-6BT single crystals were grown by flux growth method using uncalcined and calcined 94NBT-6BT powder. Crystal structures and chemical composition of grown crystals were characterized by X-ray diffraction ... -
Utilization of a phosphate ester as a dispersant for SiAlON based ceramics
(Trans Tech Publications LTD, 2007)Aqueous dispersions of SiAION forming powders (Si3N4, AIN and Y2O3) were obtained. Dispersibility of powders was found to be improved by addition of sodium tripolyphosphate. Stable aqueous suspensions of SiAION forming ... -
Application of Homogeneously Precipitated Nanosized Fe-Doped Alumina Powders to Carbon Nanotube Growth
(Wiley, 2010)Homogeneous precipitation of hydroxides was investigated as an alternative method to synthesize Fe-doped aluminum oxide (alpha-Al2-2xFe2xO3) particles over which carbon nanotubes (CNTs) were grown via a catalytic chemical ... -
Influence of Deposition Technique on Growth and Resistivity of Ta/NiFe Nano Films.
(Int Union Crystallography, 2009)… -
Directional properties and microstructures of spark plasma sintered aluminum nitride containing graphene platelets
(Elsevier Sci LTD, 2017)Graphene platelets (GPLs) containing aluminum nitride (AIN) composites were produced by using both pressureless sintering and spark plasma sintering (SPS). Poor densifications were obtained when composites were pressureless ... -
alpha/beta SiAlON BASED COMPOSITES INCORPORATED WITH MoSi2 FOR ELECTRICAL APPLICATIONS
(Amer Ceramic Soc, 2010)Electrically conductive alpha-beta SiAlON composites containing 30 vol. % MoSi2 was prepared by gas pressure sintering (GPS). The effect of sintering atmosphere on phase formation, grain growth, mechanical and electrical ...
