dc.contributor.author | Ateş, Funda | |
dc.contributor.author | Miskolczi, Norbert | |
dc.contributor.author | Sarıcaoğlu, Beyza | |
dc.date.accessioned | 2019-10-21T21:11:45Z | |
dc.date.available | 2019-10-21T21:11:45Z | |
dc.date.issued | 2015 | |
dc.identifier.issn | 0960-8524 | |
dc.identifier.issn | 1873-2976 | |
dc.identifier.uri | https://dx.doi.org/10.1016/j.biortech.2014.10.163 | |
dc.identifier.uri | https://hdl.handle.net/11421/21145 | |
dc.description | WOS: 000346647100020 | en_US |
dc.description | PubMed ID: 25484126 | en_US |
dc.description.abstract | Pressurized pyrolysis of biomasses was carried in a fixed bed reactor to obtain gases, bio-oils and chars at elevated temperatures. The products were characterized by GC-MS, FTIR, viscometer, SEM, BET and EDXRFS methods. Experiments were performed at 1, 5 and 10 bar pressure and 400, 500 and 600 degrees C temperatures. The experimental results show that in all the experimental condition the yield of bio-oil from DDGS as higher than that of canola. Yield of non-condensable gases and chars increased, while that of liquid products decreased by pressure. Increasing pressure favoured the formation of low molecular weight gas, such as H-2. Maximum surface area of chars was obtained at atmospheric pressure and the surface areas decreased rapidly with increasing pressure. GC/MS results shows that the amount of fatty acids in bio-oils was increased by increasing pressure and bio-oils showed non-Newtonian behavior. Based on EDXRFS results, bio-oils and char contained lots of elements | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier Sci LTD | en_US |
dc.relation.isversionof | 10.1016/j.biortech.2014.10.163 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Pressurized Pyrolysis | en_US |
dc.subject | Ddgs | en_US |
dc.subject | Canola | en_US |
dc.subject | Gc-Ms | en_US |
dc.subject | Morphology | en_US |
dc.title | Pressurized pyrolysis of dried distillers grains with solubles and canola seed press cake in a fixed-bed reactor | en_US |
dc.type | article | en_US |
dc.relation.journal | Bioresource Technology | en_US |
dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü | en_US |
dc.identifier.volume | 177 | en_US |
dc.identifier.startpage | 149 | en_US |
dc.identifier.endpage | 158 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.institutionauthor | Ateş, Funda | |