Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKurama, Semra
dc.contributor.authorÖzel, E
dc.contributor.authorAy, Nuran
dc.contributor.editorMandal, H
dc.contributor.editorOvecoglu, L
dc.date.accessioned2019-10-22T16:59:00Z
dc.date.available2019-10-22T16:59:00Z
dc.date.issued2004
dc.identifier.isbn0-87849-946-6
dc.identifier.issn1013-9826
dc.identifier.urihttps://dx.doi.org/10.4028/www.scientific.net/KEM.264-268.925
dc.identifier.urihttps://hdl.handle.net/11421/21709
dc.description8th Conference of the European-Ceramic-Society -- JUN 29-JUL 03, 2003 -- Istanbul, TURKEYen_US
dc.descriptionWOS: 000223059700218en_US
dc.description.abstractThermal reactions of ultrafine Mg(OH)(2) mixtures of ultrafine particles and kaolin mixtures were investigated to obtain cordierite at low temperatures. Magnesium hydroxide was precipitated from magnesium chloride (MgCl2) solution. Kaolin with three different chemical composition (K-l, K-S and K-K) was mixed with Mg(OH)(2) to form cordierite at different temperatures (900-1200degreesC). Mole ratio of mixtures were MgO:Al2O3:2SiO(2). To obtain dense cordierite, boron oxide in different quantities (in the form of magnesium borate 2MgO(.)B(2)O(3)) were added into mixtures of kaolin and Mg(OH)(2). After sintering, it was observed that, by increasing the amount of B2O3 in the mixture, the density was not changed significantly.en_US
dc.description.sponsorshipTurkish Ceram Soc, European Ceram Socen_US
dc.language.isoengen_US
dc.publisherTrans Tech Publications LTDen_US
dc.relation.ispartofseriesKEY ENGINEERING MATERIALS
dc.relation.isversionof10.4028/www.scientific.net/KEM.264-268.925en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSinteringen_US
dc.subjectCordieriteen_US
dc.subjectKaolinen_US
dc.subjectMagnesium Hydroxideen_US
dc.subjectLow Temperatureen_US
dc.titleSynthesis and sintering of cordierite at low temperature from kaolin and magnesium hydroxideen_US
dc.typeconferenceObjecten_US
dc.relation.journalEuro Ceramics Viii, Pts 1-3en_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume264-268en_US
dc.identifier.startpage925en_US
dc.identifier.endpage928en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorKurama, Semra
dc.contributor.institutionauthorAy, Nuran


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster