Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorPütün, Ersan
dc.contributor.authorUzun, Başak Burcu
dc.contributor.authorPütün, Ayşe Eren
dc.date.accessioned2019-10-22T16:59:09Z
dc.date.available2019-10-22T16:59:09Z
dc.date.issued2006
dc.identifier.issn0961-9534
dc.identifier.issn1873-2909
dc.identifier.urihttps://dx.doi.org/10.1016/j.biombioe.2005.12.004
dc.identifier.urihttps://hdl.handle.net/11421/21759
dc.descriptionWOS: 000238116000012en_US
dc.description.abstractThe purpose of this study is to evaluate the amounts of catalytic pyrolysis products of cottonseed cake in steam atmosphere and investigate the effects of both zeolite and steam on pyrolysis yields. The effect of steam was investigated by co-feeding steam at various velocities (0.6:1.3:2.7 cm s(-1)) in the presence of zeolite (20 wt% of feed). Liquid pyrolysis products obtained at the most appropriate conditions were fractionated by column chromatography. Elemental analysis and FT-IR were applied on both of these liquid products and their sub-fractions. The H/C ratios obtained from elemental analysis were compared with the petroleum products. The aliphatic subfractions of the oils were then analysed by capillary column gas chromatography. Further structural analysis of pyrolysis oil was conducted using H-1-NMR spectroscopy. The characterization has shown that the bio-oil obtained from catalytic and steam pyrolysis of cottonseed cake was more beneficial than those obtained from non-catalytic and catalytic works under static and nitrogen atmospheresen_US
dc.language.isoengen_US
dc.publisherPergamon-Elsevier Science LTDen_US
dc.relation.isversionof10.1016/j.biombioe.2005.12.004en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCatalytic Pyrolysisen_US
dc.subjectCottonseed Cakeen_US
dc.subjectBio-Oilen_US
dc.subjectClinoptiloliteen_US
dc.subjectCharacterizationen_US
dc.titleProduction of bio-fuels from cottonseed cake by catalytic pyrolysis under steam atmosphereen_US
dc.typearticleen_US
dc.relation.journalBiomass & Bioenergyen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume30en_US
dc.identifier.issue6en_US
dc.identifier.startpage592en_US
dc.identifier.endpage598en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster