Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorIşık, I
dc.contributor.authorGöçmez, H
dc.contributor.authorYanık, G
dc.contributor.authorCeylantekin, R
dc.contributor.editorMandal, H
dc.contributor.editorOvecoglu, L
dc.date.accessioned2019-10-22T16:59:12Z
dc.date.available2019-10-22T16:59:12Z
dc.date.issued2004
dc.identifier.isbn0-87849-946-6
dc.identifier.issn1013-9826
dc.identifier.urihttps://dx.doi.org/10.4028/www.scientific.net/KEM.264-268.2425
dc.identifier.urihttps://hdl.handle.net/11421/21775
dc.description8th Conference of the European-Ceramic-Society -- JUN 29-JUL 03, 2003 -- Istanbul, TURKEYen_US
dc.descriptionWOS: 000223059700580en_US
dc.description.abstractIn this study, the waste clays extracted from coal basin were used as a wall tile ingredient instead of the clay materials of the standardized biscuit formulation of the wall tile. XRD data show that waste clay contains major clay minerals such as illite, kaolinite and montmorillonite. It was found that clay-size particles (equal or less than 2mum) distributed between 19.85 and 47%. The green and dry strength of the specimen containing illite and/or montmorillonite were increased 35% compared with the standard biscuit specimen. The fired strength of the samples having alkaline earth oxides has been improved 20%, whereas water absorption reduced 28%. It was also found that the substitution of 5% waste clay in the wall tile biscuit formulation has revealed relatively better physical properties.en_US
dc.description.sponsorshipTurkish Ceram Soc, European Ceram Socen_US
dc.language.isoengen_US
dc.publisherTrans Tech Publications LTDen_US
dc.relation.ispartofseriesKEY ENGINEERING MATERIALS
dc.relation.isversionof10.4028/www.scientific.net/KEM.264-268.2425en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWaste Clayen_US
dc.subjectWall Tileen_US
dc.subjectCoal Basinen_US
dc.titleThe utilization of waste clay from coal basin in the wall tile body formulationen_US
dc.typeconferenceObjecten_US
dc.relation.journalEuro Ceramics Viii, Pts 1-3en_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume264-268en_US
dc.identifier.startpage2425en_US
dc.identifier.endpage2428en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster