| dc.contributor.author | Sofuoğlu, Mehmet Alper | |
| dc.contributor.author | Gürgen, Selim | |
| dc.contributor.author | Çakır, Fatih Hayati | |
| dc.contributor.author | Orak, Sezan | |
| dc.contributor.editor | Halicka, K | |
| dc.contributor.editor | Nazarko, L | |
| dc.date.accessioned | 2019-10-23T17:55:54Z | |
| dc.date.available | 2019-10-23T17:55:54Z | |
| dc.date.issued | 2017 | |
| dc.identifier.issn | 1877-7058 | |
| dc.identifier.uri | https://dx.doi.org/10.1016/j.proeng.2017.03.176 | |
| dc.identifier.uri | https://hdl.handle.net/11421/22749 | |
| dc.description | 7th International Conference on Engineering, Project, and Production Management (EPPM) -- SEP 21-23, 2016 -- Bialystok, POLAND | en_US |
| dc.description | WOS: 000406745400086 | en_US |
| dc.description.abstract | Springback is an inevitable phenomenon in bending operations. For the geometrical accuracy in manufacturing, springback should be predicted and a required compensation should be applied to the operation. The numerical method is a very popular approach to predict the behavior of material in the operations. This method provides the reduction in time, effort and costs in comparison with the trial and error method. In this study, springback in the three-point bending operation of AA6082T6 tubes is investigated. A numerical model is established, and results are compared with experimental outputs for verification of the model. Effects of the indenter travel distance and a wall thickness of a tube in springback are studied. | en_US |
| dc.description.sponsorship | Bialystok Univ Technol, Fac Management, Assoc Engn Project & Prod Management, Int Soc Mfg Serv & Management | en_US |
| dc.description.sponsorship | Scientific and Technological Research Council of Turkey (TUBITAK) [2228-B, 2211-C]; Ministry of Science and Higher Education [712/P-DUN/2016] | en_US |
| dc.description.sponsorship | The authors M.A. Sofuoglu and S. Gurgen acknowledge the support of the Scientific and Technological Research Council of Turkey (TUBITAK) under program 2228-B and 2211-C respectively.; 7th International Conference on Engineering, Project, and Production Management (EPPM2016) was financed in the framework of the contract no. 712/P-DUN/2016 by the Ministry of Science and Higher Education from the funds earmarked for the public understanding of science initiatives. | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Elsevier Science BV | en_US |
| dc.relation.ispartofseries | Procedia Engineering | |
| dc.relation.isversionof | 10.1016/j.proeng.2017.03.176 | en_US |
| dc.rights | info:eu-repo/semantics/openAccess | en_US |
| dc.subject | Three-Point Bending | en_US |
| dc.subject | Aluminum Tube | en_US |
| dc.subject | Springback | en_US |
| dc.title | Springback Behavior of AA6082T6 Tubes in Three-point Bending Operation | en_US |
| dc.type | conferenceObject | en_US |
| dc.relation.journal | 7th International Conference On Engineering, Project, and Production Management | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Ulaştırma Meslek Yüksekokulu | en_US |
| dc.identifier.volume | 182 | en_US |
| dc.identifier.startpage | 658 | en_US |
| dc.identifier.endpage | 664 | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US] |
